Hitachi CP-WX4021N, CP-X5021N user manual Microphone function, Speakers Monitor

Page 14

Setting up

Connecting with your devices (continued)

Speakers

Monitor

(with an amplifier)

Microphone

Wired

system

remote

 

 

control

 

(optional)

(￿45)

(￿46)

NOTE • If a loud feedback noise is produced from the speaker, move the microphone away from the speaker.

• This projector doesn't support plug-in power for the microphone.

Microphone function

You can connect a dynamic microphone to the MIC port with a 3.5 mm mini-plug. In that case, the built-in speaker outputs the sound from the microphone, even while the sound from the projector is output. You can input line level signal to the MIC port from equipment such as wireless microphone. Select HIGH in the MIC LEVEL item of the AUDIO menu when you input line level audio signal

to the MIC port. In the normal mode, the volume of the microphone can be adjusted separately from the volume of the projector using the menu. (￿46, 47) In the standby mode, the volume of the microphone is adjustable with the

VOLUME +/- buttons on the remote control, in synchronization with the volume of the projector. (￿19)

Even when the sound of projector is set to mute mode by the AUDIO SOURCE function (￿46), the volume of the microphone is adjustable.

In both modes (standby or normal), the MUTE button on the remote control works on the sounds of the microphone and the projector. (￿19)

This projector doesn't support plug-in power for the microphone.

14

Image 14
Contents Trademark acknowledgment About this manualThank you for purchasing this projector Contents Features Checking the contents of packagePart names ProjectorControl port Control panel and Lens adjustersRear panel 10 ~ LAN port Audio IN1 portComputer button Remote controlDown button Volume + button STANDBY/ON buttonCP-X4021N, CP-X5021N Setting upArrangement Screen Projection Screen height Size Distance CP-WX4021N1610 Projection Screen height DistanceDo not place the projector on a metal stand Connecting with your devices About Plug-and-Play capabilityConnecting with your devices ComputerStorage Computer Access pointUSB DeviceDigital VCR/DVD/Blu-ray Disc player Video Device Speakers Monitor Microphone Wired System Remote Control OptionalMicrophone function Power cord Connecting to a power supplyUsing the security bar and slot Anti-theft chain or wire Security bar Security slotAbout the remote control signal Remote controlInstalling the batteries Hitachi MAXELL, Part No.LR6 or R6PChanging the frequency of remote control signal Using as a simple PC mouse & keyboardTurning off the power Power on/offTurning on the power Operating Adjusting the volumeSelecting an input signal Temporarily muting the soundVideo button Press the MY Source / DOC. Camera button onComputer button MY SourceFor an Hdmi signal Searching an input signalFor a computer signal Selecting an aspect ratioAdjusting the projector’s elevator Horizontal Adjusting the lensFocus ring Zoom ring Lock Horizontal adjuster lock VerticalUsing the automatic adjustment feature Adjusting the positionCorrecting the distortion AutoPerfect FIT Using the magnify feature Magnify ON/OFF buttonFreeze button Temporarily freezing the screenTemporarily blanking the screen Blank buttonAdvanced Menu Using the menu functionEasy Menu Indication in OSD On Screen Display Indication MeaningAuto Keystone Picture ModeAspect KeystoneMirror ECO ModeReset Filter TimeContrast Picture menuBrightness GammaTint Color TempColor Active Iris SharpnessPresentation Theater OFF SAVE-1, SAVE-2, SAVE-3, SAVE-4Image menu For a computer signalFor an Hdmi signal Position USB Type B or Hdmi portSize PhaseAuto Adjust ExecuteHigh MID LOW Input menuTV Film OFF Video NRHdmi Range Video FormatHdmi Format Frame Lock Auto Sync on G OFFComputer On OFFResolution Setup menu Normal Hinvert Vinvert H&VINVERT Auto ECO ModeNormal ECO Normal Saving Speaker VolumeAudio menu Audio SourceMIC Level MIC VolumeHdmi Audio Blank Screen menuEnglish Français Deutsch Español Start UPMyScreen registration is finished Capturing error has occurred. Please try againMyScreen Sync is OUT of Range MyScreen LockNo Input is Detected Invalid Scan FreqSource Name Template Test Pattern DOT-LINE1 DOT-LINE2 DOT-LINE3Mode Description Closed CaptionDisplay ChannelAuto Search Direct PowerOption menu AutoUSB Type B Auto PowerOFF Air filter Cancel OKLamp Time MY Button Computer IN1 Computer IN2 LAN USB Type a Video S-VIDEO Component Hdmi USB Type BGhost ServiceFAN Speed Filter MessageRemote Freq Control Panel Remote ControlKEY Lock 1NORMAL 2HIGHBaud Rate Serial SettingsCommunication Type ParityStack Response Limit TimeTransmission Method Factory Reset InformationDynamic Host Configuration Protocol Setup DhcpNetwork menu IP Address DefaultSetup Gateway SubnetProjector Name MY Image AMX D.DQuit PresentationMulti PC User NameGuide Enter the Security menu PasswordSecurity menu SecurityMyScreen Turning on the MyScreen PasswordTurning off the MyScreen Password Turning off the PIN Lock PIN LockTurning on the PIN Lock If you have forgotten your PIN codeTurning off the Transition Detector Transition DetectorTurning on the Transition Detector Turning off the MY Text Password MY Text PasswordTurning on the MY Text Password Writing IndicatorMY Text Stack LockSupported storage media Presentation toolsPC-LESS Presentation Supported formatThumbnail mode Down Operating by buttons or keysButton operation Enter InputOperating by the menu on the Thumbnail screen This file seems to be broken or not supported format Full Screen Mode Slideshow mode Return Playlist USB Display Right-Click menu Options window Type number DT01171 Replacing the lamp MaintenanceReplacing the lamp High Voltage High Temperature High Pressure Lamp warningCleaning and replacing the air filter Type number MU06641 Filter unitCleaning and replacing the air filter Replacing the internal clock battery Maxell , part number CR2032 or CR2032HInside of the projector Caring for the cabinet and remote controlOther care Caring for the lensAn improper signal is input TroubleshootingThere is no input signal Related messagesInternal temperature is rising Button operation is not availableRegarding the indicator lamps Power Lamp TempShutting the projector down Resetting all settingsPower Lamp Temp indicator indicator indicator Description Signal source does not correctly work Phenomenon Cases not involving a machine defectAudio SOURCE/SPEAKER setting is not correct Signal cables are not correctly connectedVolume is adjusted to an extremely low level Brightness is adjusted to an extremely low levelFrame Lock function cannot work on the current Input signal Color settings are not correctly adjustedColor Space setting is not suitable Freeze function is workingCommunication Type for the Control port is Computer cannot start up in the current hardwareSaving function is working Set to Network BridgeSpecifications End User License Agreement for the Projector Software