Hitachi CP-WX4021N, CP-X5021N KEY Lock, Control Panel Remote Control, Remote Freq, 1NORMAL 2HIGH

OPTION menu

Item	Description
	KEY LOCK
	(1) Use the ▲/▼ buttons to choose the operations control.
	CONTROL PANEL ￿ REMOTE CONTROL
	(2) Use the ◄/► buttons to select ON or OFF.
	ON ￿ OFF
	Selecting ON in Step 2 locks the buttons except STANDBY/ON on
	the operations control selected in Step 1. Selecting OFF releases
	the locked buttons on the operations control selected in Step 1.
	• Please use this function to prevent tampering or accidental
	operation. This function does not have any effect on the remote
	control.
	REMOTE FREQ.
	(1) Use the ▲/▼ button to change the projector's remote sensor
	frequency setting (￿4, 17).
	1:NORMAL ￿ 2:HIGH
	(2) Use the ◄/► button to change the
	projector's remote sensor on or off.
	ON ￿ OFF
	The factory default setting is for both 1:NORMAL and 2:HIGH to be
SERVICE	on. If the remote control does not function correctly, disable either of
	them.
(continued)
	It's not possible to disable both options at the same time.
	Selecting this item displays COMMUNICATION
	menu.
	In this menu, you can configure the serial
	communication settings of the projector using the
	CONTROL port.

COMMUNICATION • Select an item using the cursor buttons ▲/▼. Then pressing the ► button opens the submenu

for the setting item you selected. Or, pressing the ◄ button instead of the ► button makes the menu back to the previous one without changing the setup. Each submenu can be operated as described above.

•When COMMUNICATION TYPE (￿61) is set to OFF, the other items in COMMUNICATION menu are invalid.

•For the function of serial communication, refer to the User's Manual - Network Guide.

(continued on next page)

60