Hitachi CP-X5021N, CP-WX4021N user manual Normal Saving

SETUP menu

Item Description

Using ▲/▼ buttons switches the standby mode setting between NORMAL and SAVING.

NORMAL ￿ SAVING

When SAVING is selected, the power consumption in the standby mode is lowered with some functional restriction as below:

•When SAVING is selected, the RS-232C communication control except to turn the projector on and the network function are disabled

STANDBY MODE while the projector is in the standby mode. If the COMMUNICATION TYPE in the COMMUNICATION menu is set to NETWORK

BRIDGE, all of the RS-232C commands are disabled (￿61).

•When SAVING is selected, STANDBY setting of AUDIO SOURCE (￿46) is invalid, and no signal is output from AUDIO OUT port in the standby mode.

•When SAVING is selected, STANDBY setting of MONITOR OUT is invalid, and no signal is output from MONITOR OUT port in the standby mode.

While the image signal from the input port chosen in step (1) is projected, the image signal from the input port selected in step (2) is output to MONITOR OUT port.

(1)Choose a picture input port using ▲/▼ buttons. Choose STANDBY to select the picture output in the standby mode.

MONITOR OUT (2) Select one of the COMPUTER IN ports using ◄/► buttons.

Select OFF to disable the MONITOR OUT port for the input port or standby mode chosen in the step (1).

•You cannot select COMPUTER IN1 in step (1) and COMPUTER IN2 in step (2) and vice versa.

45