Hitachi CP-WX4021N, CP-X5021N Auto ECO Mode, Normal ECO, Normal Hinvert Vinvert H&VINVERT

SETUP menu

Item	Description
	Using the ▲/▼ buttons corrects the vertical keystone distortion.
	Shrink the top of the image ￿ Shrink the bottom of the image.
	• The adjustable range of this function will vary among inputs. For
KEYSTONE	some input, this function may not work well.
	• When the horizontal lens shift is not set to the center, this function
	may not work well.
	• This function is unavailable when the TRANSITION DETECTOR
	(￿74) is ON or the screen is adjusted by PERFECT FIT (￿26).
	Selecting this item displays the KEYSTONE_PERFECT FIT dialog.
PERFECT FIT	For details, see PERFECT FIT in Correcting the distortion (￿26).
	• This is unavailable when the TRANSITION DETECTOR is ON
	(￿74).
	Using the ▲/▼ buttons turns on/off the AUTO ECO MODE.
	ON ￿ OFF
AUTO ECO MODE	• When ON is selected, the projector will always be set to Eco mode
	at start-up regardless of the ECO MODE (￿below) setting. An OSD
	message “AUTO ECO MODE” will be displayed for tens of seconds
	when the projector starts with this function activated.
	Using the ▲/▼ buttons turns off/on the Eco mode.
	NORMAL ￿ ECO
ECO MODE	• When the ECO is selected, acoustic noise and screen brightness
	are reduced.
	• When AUTO ECO MODE (￿above) is set to ON, the projector will
	always be set to Eco mode at start-up regardless this setting.
	Using the ▲/▼ buttons switches the mode for mirror status.

MIRROR NORMAL ￿ H:INVERT ￿ V:INVERT ￿ H&V:INVERT

If the Transition Detector is on and MIRROR status is changed, TRANSITION DETECTOR ON alarm (￿74) will be displayed when projector is restarted after the AC power is turned off.

(continued on next page)

44