Operating
Correcting the distortion
To correct the distortion of projected screen, you can select one of three options, AUTO, MANUAL and PERFECT FIT.
AUTO: performs the automatic vertical keystone correction. (
43)
MANUAL: allows you to adjust the vertical and horizontal keystone.
PERFECT FIT: allows you to adjust each of the screen corners and sides to correct the distortion.
1. First press the KEYSTONE button to display the KEYSTONE menu, and point at one of items with the ▲/▼ buttons. Then follow the procedure shown below for the item you selected.
NOTE • The menu or dialog will automatically disappear after several seconds of inactivity. Pressing the KEYSTONE button again finishes the operation and closes the menu or dialog.
• When the screen is adjusted by PERFECT FIT, neither AUTO nor MANUAL is selectable. If you wish to use these functions, refer to step 3 in the PERFECT FIT item to initialize the adjustment of PERFECT FIT.
• When TRANSITION DETECTOR is ON, these functions are not available (
74).
AUTO
2. When AUTO is pointed at, pressing the ► or ENTER button performs automatic vertical keystone correction. To close the operation, press the KEYSTONE button, or pointed at the EXIT in the dialog with ▲/▼ buttons and press the ► or ENTER button.
MANUAL
2. When MANUAL is pointed at, pressing the ► or ENTER button displays the KYSTONE_MANUAL dialog.
3. Select the vertical or horizontal keystone (
/ 
) with the ▲/▼ buttons.
4. Use the ◄/► buttons to adjust the keystone distortion.
5. To close the operation, press the KEYSTONE button, or pointed at the EXIT in the dialog with ▲/▼ buttons and press the ► or ENTER button. Alternatively, point at RETURN in the dialog with the ▲/▼ buttons and press the ◄ or ENTER button to return to the menu in step 1.
25