Hitachi CP-WX4021N, CP-X5021N user manual MY Text, Writing, Indicator, Stack Lock

SECURITY menu

Item	Description
	(1) Use the ▲/▼ buttons on the SECURITY menu to
	select the MY TEXT DISPLAY and press the ► or
	ENTER button to display the MY TEXT DISPLAY
	on/off menu.
	(2) Use the ▲/▼ buttons on the MY TEXT DISPLAY on/off menu to select
MY TEXT	on or off.
	ON ￿ OFF
DISPLAY	When it is set ON, the MY TEXT will be displayed
	on the START UP screen and the INPUT_
	INFORMATION when the INFORMATION on the
	SERVICE menu is chosen.
	• This function is available only when the MY TEXT
	PASSWORD function is set to the OFF.
	(1) Use the ▲/▼ buttons on the
	SECURITY menu to select the MY
	TEXT WRITING and press the ►
	button. The MY TEXT WRITING dialog
	will be displayed.
	(2) The current MY TEXT will be displayed
	on the first 3 lines. If not yet written, the
	lines will be blank.
	Use the ▲/▼/◄/► buttons and the
	ENTER or INPUT button to select and
	enter characters. To erase 1 character
	at one time, press the RESET button or
	press the ◄ and INPUT button at the
	same time. Also if you move the cursor
MY TEXT	to DELETE or ALL CLEAR on screen
	and press the ENTER or INPUT button,
WRITING	1 character or all characters will be
	erased. The MY TEXT can be input up
	to 24 characters on each line.
	(3) To change an already inserted character,
	press the ▲/▼ button to move the
	cursor to one of the first 3 lines, and use
	the ◄/► buttons to move the cursor on
	the character to be changed.
	After pressing the ENTER or INPUT button, the character is selected.
	Then, follow the same procedure as described at the item (2) above.
	(4) To finish entering text, move the cursor to the OK on screen and press
	the ►, ENTER or INPUT button. To revert to the previous MY TEXT
	without saving changes, move the cursor to the CANCEL on screen and
	press the ◄, ENTER or INPUT button.
	• The MY TEXT WRITING function is available only when the MY TEXT
	PASSWORD function is set to OFF.
	Selecting this item displays the SECURITY INDICATOR dialog. Use the
SECURITY	▲/▼ buttons to select ON or OFF.
	ON ￿ OFF
INDICATOR
	When ON is selected while PIN LOCK or TRANSITION DETECTOR is ON,
	the SECURITY indicator blinks in the standby state (￿73, 74).
STACK LOCK	Selecting this item displays the STACK LOCK dialog. For more information
	about this menu, check our web site (￿User's manual (concise)).

76