Hitachi CP-WX4021N, CP-X5021N user manual Template, Test Pattern DOT-LINE1 DOT-LINE2 DOT-LINE3

SCREEN menu

Item	Description
	(6) The current name will be displayed on
	the first line. Use the ▲/▼/◄/► buttons
	and the ENTER or INPUT button to
	select and enter characters. To erase 1
	character at one time, press the RESET
	button or press the ◄ and INPUT button
	at the same time. Also if you move the
	cursor to DELETE or ALL CLEAR on
	screen and press the ENTER or INPUT
	button, 1 character or all characters will
	be erased. The name can be a maximum
SOURCE NAME	of 16 characters.
(Continued)	(7) To change an already inserted character,
	press the ▲ button to move the cursor to
	the first line, and use the ◄/► buttons to
	move the cursor on the character to be
	changed.
	After pressing the ENTER or INPUT button, the character is
	selected. Then, follow the same procedure as described at the
	item (6) above.
	(8) To finish entering text, move the cursor to the OK on screen and
	press the ►, ENTER or INPUT button. To revert to the previous
	name without saving changes, move the cursor to the CANCEL
	on screen and press the ◄, ENTER or INPUT button.
	Using the ▲/▼ cursor buttons switches the mode for the template
	screen.
	Press the ► cursor (or the ENTER) button to display the selected
	template, and press the ◄ cursor button to close the displayed
	screen.
	The last selected template is displayed when the MY BUTTON
TEMPLATE	allocated to the TEMPLATE function is pressed (￿58).
	TEST PATTERN ￿ DOT-LINE1 ￿ DOT-LINE2 ￿ DOT-LINE3
	￿	￿
	STACK ￿ MAP2 ￿ MAP1 ￿ CIRCLE2 ￿ CIRCLE1 ￿ DOT-LINE4
	You can turn a map upside down and scroll it horizontally when
	MAP1 or MAP2 is selected. To invert or scroll the map, display
	the guidance by pressing the RESET button on the remote three
	seconds or more when MAP1 or MAP2 appears.

(continued on next page)

52