Hitachi CP-WX4021N, CP-X5021N user manual Color Temp, Tint

PICTURE menu

Item

Description

Using the ▲/▼ buttons switches the color temperature mode.

1 HIGH ￿ 1 CUSTOM ￿ 2 MID ￿	2 CUSTOM
￿	￿
6 CUSTOM	3 LOW
￿	￿
6 Hi-BRIGHT-3	3 CUSTOM
￿	￿

5 CUSTOM ￿ 5 Hi-BRIGHT-2 ￿ 4 CUSTOM ￿ 4 Hi-BRIGHT-1

	To adjust CUSTOM
	Selecting a mode whose name includes
	CUSTOM and then pressing the ► button
	or the ENTER button displays a dialog
	to aid you in adjusting the OFFSET and
COLOR TEMP	GAIN of the selected mode.
	OFFSET adjustments change the color intensity on the whole tones
	of the test pattern.
	GAIN adjustments mainly affect color intensity on the brighter tones
	of the test pattern.
	Choose an item using the ◄/► buttons, and adjust the level using
	the ▲/▼ buttons.
	You can display a test pattern for checking the effect of your
	adjustment by pressing the ENTER button.
	Each time you press the ENTER button, the pattern changes as below.
	No pattern ￿ Gray scale of 9 steps
	Ramp ￿ Gray scale of 15 steps
	• Lines or other noise might appear on the screen
	when this function is operated, but it is not a
	malfunction.
	Using the ◄/► buttons adjusts the strength of whole color.
	Weak ￿ Strong
	• This item can be selected only for a video, s-video and component
COLOR	video signal.
	• For an HDMI signal, this item can also be selected if either (1) or (2) applies.
	(1) HDMI FORMAT item in the INPUT menu is set to VIDEO.
	(2) HDMI FORMAT item in the INPUT menu is set to AUTO, and the
	projector recognizes that it receives video signals.
	Using the ◄/► buttons adjusts the tint.
	Reddish ￿ Greenish
	• This item can be selected only for a video, s-video and component
TINT	video signal.
	• For an HDMI signal, this item can also be selected if either (1) or (2) applies.
	(1) HDMI FORMAT item in the INPUT menu is set to VIDEO.
	(2) HDMI FORMAT item in the INPUT menu is set to AUTO, and the
	projector recognizes that it receives video signals.

34 (continued on next page)