Hitachi CP-WX4021N, CP-X5021N user manual Projector Name

Page 66

NETWORK menu

Item

Description

PROJECTOR

NAME

(1)Use the ▲/▼ buttons on the NETWORK menu to select the PROJECTOR NAME and press the ► button. The PROJECTOR NAME dialog will be displayed.

(2)The current PROJECTOR NAME will be displayed on the first 3 lines. Particular projector name is pre-assigned by default. Use the ▲/▼/◄/► buttons and the ENTER or INPUT button to select and enter characters.

To erase 1 character at one time, press the RESET button or press the ◄ and INPUT button at the same time. Also if you move the cursor to DELETE or ALL CLEAR on screen and push the ENTER or INPUT button, 1 character or all characters will be erased.The PROJECTOR NAME can be input up to 64 characters.

(3)To change an already inserted character, press the ▲/▼ button to move the cursor to one of the first 3 lines, and use the ◄/► buttons to move the cursor on the character to be changed. After pressing the ENTER or INPUT button, the character is selected. Then, follow the same procedure as described at the item (2) above.

(4)To finish entering text, move the cursor to the OK on screen and press the ►, ENTER or INPUT button. To revert to the previous PROJECTOR NAME without saving changes, move the cursor to the CANCEL on screen and press the ◄, ENTER or INPUT button.

(continued on next page)

66

Image 66
Contents About this manual Thank you for purchasing this projectorTrademark acknowledgment Contents Features Checking the contents of packagePart names ProjectorControl port Control panel and Lens adjustersRear panel 10 ~ LAN port Audio IN1 portComputer button Remote controlDown button Volume + button STANDBY/ON buttonSetting up ArrangementCP-X4021N, CP-X5021N Screen Projection Screen height Size Distance CP-WX4021N1610 Projection Screen height DistanceDo not place the projector on a metal stand Connecting with your devices About Plug-and-Play capabilityConnecting with your devices ComputerStorage Computer Access pointUSB DeviceDigital VCR/DVD/Blu-ray Disc player Video Device Microphone Wired System Remote Control Optional Microphone functionSpeakers Monitor Power cord Connecting to a power supplyUsing the security bar and slot Anti-theft chain or wire Security bar Security slotAbout the remote control signal Remote controlInstalling the batteries Hitachi MAXELL, Part No.LR6 or R6PChanging the frequency of remote control signal Using as a simple PC mouse & keyboardPower on/off Turning on the powerTurning off the power Operating Adjusting the volumeSelecting an input signal Temporarily muting the soundVideo button Press the MY Source / DOC. Camera button onComputer button MY SourceFor an Hdmi signal Searching an input signalFor a computer signal Selecting an aspect ratioAdjusting the projector’s elevator Horizontal Adjusting the lensFocus ring Zoom ring Lock Horizontal adjuster lock VerticalUsing the automatic adjustment feature Adjusting the positionCorrecting the distortion AutoPerfect FIT Using the magnify feature Magnify ON/OFF buttonFreeze button Temporarily freezing the screenTemporarily blanking the screen Blank buttonUsing the menu function Easy MenuAdvanced Menu Indication in OSD On Screen Display Indication MeaningAuto Keystone Picture ModeAspect KeystoneMirror ECO ModeReset Filter TimeContrast Picture menuBrightness GammaColor Temp ColorTint Active Iris SharpnessPresentation Theater OFF SAVE-1, SAVE-2, SAVE-3, SAVE-4For a computer signal For an Hdmi signalImage menu Position USB Type B or Hdmi portSize PhaseAuto Adjust ExecuteHigh MID LOW Input menuTV Film OFF Video NRVideo Format Hdmi FormatHdmi Range Frame Lock Auto Sync on G OFFComputer On OFFResolution Setup menu Auto ECO Mode Normal ECONormal Hinvert Vinvert H&VINVERT Normal Saving Speaker VolumeAudio menu Audio SourceMIC Volume Hdmi AudioMIC Level Blank Screen menuEnglish Français Deutsch Español Start UPCapturing error has occurred. Please try again MyScreenMyScreen registration is finished Sync is OUT of Range MyScreen LockNo Input is Detected Invalid Scan FreqSource Name Template Test Pattern DOT-LINE1 DOT-LINE2 DOT-LINE3Mode Description Closed CaptionDisplay ChannelAuto Search Direct PowerOption menu AutoAuto Power OFFUSB Type B Cancel OK Lamp TimeAir filter MY Button Computer IN1 Computer IN2 LAN USB Type a Video S-VIDEO Component Hdmi USB Type BGhost ServiceFAN Speed Filter MessageRemote Freq Control Panel Remote ControlKEY Lock 1NORMAL 2HIGHBaud Rate Serial SettingsCommunication Type ParityResponse Limit Time Transmission MethodStack Factory Reset InformationSetup Dhcp Network menuDynamic Host Configuration Protocol IP Address DefaultSetup Gateway SubnetProjector Name MY Image AMX D.DQuit PresentationMulti PC User NameGuide Enter the Security menu PasswordSecurity menu SecurityTurning on the MyScreen Password Turning off the MyScreen PasswordMyScreen Turning off the PIN Lock PIN LockTurning on the PIN Lock If you have forgotten your PIN codeTransition Detector Turning on the Transition DetectorTurning off the Transition Detector MY Text Password Turning on the MY Text PasswordTurning off the MY Text Password Writing IndicatorMY Text Stack LockSupported storage media Presentation toolsPC-LESS Presentation Supported formatThumbnail mode Down Operating by buttons or keysButton operation Enter InputOperating by the menu on the Thumbnail screen This file seems to be broken or not supported format Full Screen Mode Slideshow mode Return Playlist USB Display Right-Click menu Options window Maintenance Replacing the lampType number DT01171 Replacing the lamp High Voltage High Temperature High Pressure Lamp warningCleaning and replacing the air filter Type number MU06641 Filter unitCleaning and replacing the air filter Replacing the internal clock battery Maxell , part number CR2032 or CR2032HInside of the projector Caring for the cabinet and remote controlOther care Caring for the lensAn improper signal is input TroubleshootingThere is no input signal Related messagesInternal temperature is rising Button operation is not availableRegarding the indicator lamps Power Lamp TempResetting all settings Power Lamp Temp indicator indicator indicator DescriptionShutting the projector down Signal source does not correctly work Phenomenon Cases not involving a machine defectAudio SOURCE/SPEAKER setting is not correct Signal cables are not correctly connectedVolume is adjusted to an extremely low level Brightness is adjusted to an extremely low levelFrame Lock function cannot work on the current Input signal Color settings are not correctly adjustedColor Space setting is not suitable Freeze function is workingCommunication Type for the Control port is Computer cannot start up in the current hardwareSaving function is working Set to Network BridgeSpecifications End User License Agreement for the Projector Software