Hitachi CP-X5021N, CP-WX4021N user manual Multi PC, User Name

NETWORK menu

Item		Description
		• To change from Multi PC mode to Single PC mode,
		select one of computers in the dialog using the
		▲/▼/◄/► buttons and press the ENTER or INPUT
		button.
		Press the ► button to choose OK, and then press
		ENTER or INPUT again. The image for the selected
		computer is displayed on full screen.
		• To change from Single PC mode to Multi PC mode,
		press ► button to choose OK in the dialog and press
		the ENTER or INPUT button.
		The display mode is changed.
	MULTI PC	• For details on how to switch
		the display mode to Multi PC
	MODE
		mode on your computer, see
	(continued)
		the section Switching the
PRESENTATION		display mode in the User's Manual – Network Guide.
		• The Presenter mode setting of the selected
(continued)		computer becomes valid when the display mode is
		changed to Single PC mode.
		Also, the Presenter mode setting
		becomes invalid when the
		display mode is changed to Multi
		PC mode, regardless the setting
		on the computers.
		For details, see the section Presenter mode in the
		User's Manual – Network Guide.
		Selecting this item displays the user name. This
		function helps you identify from which computer the
	DISPLAY	current image is sent.
		• You can set user names for each computer on
	USER NAME
		“LiveViwer”.
		For details, see the section Display User Name in
		the User's Manual – Network Guide.
(continued on next page)

69