Lexmark 3400 Series manual Load up to Make sure

Load up to	Make sure
25 sheets of labels	•	The print side of the labels faces you.
	•	The top of the labels feeds into the printer first.
	•	The adhesive on the labels does not extend to within 1 mm of the
		edge of the label.
	•	You use full label sheets. Partial sheets (with areas exposed by
		missing labels) may cause labels to peel off during printing, resulting
		in a paper jam.
	•	The labels are loaded against the right side of the paper support.
	•	The paper guide rests against the left edge of the labels.
	Note: Labels require more drying time. Remove each sheet of labels as
	it exits, and allow it to dry to avoid ink smudging.
50 transparencies	•	The rough side of the transparencies faces you.
	•	If the transparencies have a removable strip, each strip faces away
		from you and down toward the printer.
	•	The transparencies are loaded against the right side of the paper
		support.
	•	The paper guide rests against the left edge of the transparencies.
	Notes:
	•	Transparencies with paper backing sheets are not recommended.
	•	Transparencies require more drying time. Remove each
		transparency as it exits, and allow it to dry to avoid ink smudging.
100 sheets of custom-size paper	•	The print side of the paper faces you.
	•	The paper size fits within these dimensions:
		Width:
		– 76–216 mm
		– 3.0–8.5 inches
		Length:
		– 127–432 mm
		– 5.0–17.0 inches
	•	The paper is loaded against the right side of the paper support.
	•	The paper guide rests against the left edge of the paper.

29