Note: The printer reads only one memory device at a time.
Using a
Connect a
1Insert one end of the USB cable into the camera.
Note: Use only the USB cable that came with the digital camera.
2Insert the other end of the cable into the PictBridge port on the front of the printer.
Notes:
•Make sure the
•The printer reads only one media device at a time.
•If the PictBridge connection is successful, the following appears on the display: PictBridge camera detected. Press to change settings. If any other message appears, see “Error messages” on page 71.
3Follow the instructions in the camera documentation to select and print photos.
Transferring digital photos to a computer
1Make sure the printer is connected to a computer, and both the printer and computer are on.
2Insert a memory card. For more information, see “Inserting a memory card” on page 36. The Fast Pics dialog appears on the computer screen.
3Click Save Photos to PC.
The light on the printer blinks to indicate the memory card is transmitting data to the computer.
4Follow the instructions on the computer screen to specify where you want to save the images.
Browsing and selecting photos stored on the computer
1Click Start Programs or All Programs Lexmark 3400 Series.
2Select Imaging Studio.
37