Troubleshooting
•“Setup troubleshooting” on page 58
•“Print troubleshooting” on page 61
•“Copy troubleshooting” on page 64
•“Scan troubleshooting” on page 65
•“Fax troubleshooting” on page 67
•“Jams and misfeeds troubleshooting” on page 68
•“Memory card troubleshooting” on page 70
•“Error messages” on page 71
•“Removing and reinstalling the software” on page 74
Setup troubleshooting
Incorrect language appears on the display
1Press to turn off the printer.
2Press and hold followed by until the display reads Language Reset.
3Release the buttons.
4Press or repeatedly until the language you want appears on the display.
5Press to save.
Power button is not lit
1Disconnect the power cord from the wall outlet, and then from the printer.
2Plug the cord all the way into the power supply on the printer.
2
1
3Plug the cord into an electrical outlet that other electrical devices have been using.
4If the light is not on, press .
Software does not install
The following operating systems are supported:
•Windows 98/Me
•Windows 2000
•Windows XP
58