Lexmark 4433, 4445 manual Loading paper and original documents, Load up to, Make sure

Load up to

10 iron-on transfers

25 greeting cards

25 index cards

25 photo cards

25 postcards

custom-size paper

banner paper

Make sure

•You follow the loading instructions that came with the iron-on transfers.

•The print side of the transfers faces you.

•The transfers are loaded in the center of the paper support.

•The paper guides rest against the edges of the transfers.

Note: For best results, load transfers one at a time.

•The print side of the cards faces you.

•The cards are loaded in the center of the paper support.

•The paper guides rest against the edges of the cards.

Note: Photo cards require more drying time. Remove each photo card as it exits, and then allow it to dry to avoid ink smudging.

•The print side of the paper faces you.

•The paper size fits within these dimensions: Width:

–76.2–215.9 mm

–3.0–8.5 inches

Length:

–127.0–355.6 mm

–5.0–17.0 inches

•The paper is loaded in the center of the paper support.

•The paper guides rest against the edges of the paper.

•You remove all the paper from the paper support before loading the banner paper.

•You tear off only the number of pages needed to print the banner.

•You place the required stack of banner paper behind the printer, and then feed in the first sheet.

•The leading edge of the banner paper feeds into the printer first.

•The paper is loaded in the center of the paper support.

•The paper guides rest against the edges of the paper.

Loading paper and original documents

24