Oki 7100e+ manual IP Address Setup, Repeat for 84SUBNET Mask and 85DEFAULT, PressMENU/EXIT

Page 14

Setting Up the Network Print

ServerUsing the Front Panel (LCD

Display)

You can configure the IP Address, Subnet Mask and Gateway address for the network print server from the fax machineís front panel. The front panel procedure is described below.

IP Address Setup

!When printing with a NetWare server, the IP Address configuration may not be necessary if Novellís IPX/SPX protocol is used, since there will be auto-discovery of the print server.

The network print server automatically uses DHCP to discover the IP address if your network has a DHCP server running. If not, check with your network administrator for the correct IP address, subnet mask and default gateway values to use.

1At the fax machineís front panel, press the MENU key.

2Using the arrow keys, select 10:SETUP, then press Enter.

3Using the arrow keys, select 7:LAN OPTIONS, then press Enter.

4Using the arrow keys, select 83:IPADDRESS, then press Enter. Type in the correct IP address using the numeric keypad. To correct an entry, press the ìleftî key to move

back, then re-enter the desired number. Press Enter to register the value.

!If an IP address octet is less than three digits, use the shift arrow key to move to the next octet.

5Repeat step 4 for 84:SUBNET MASK and 85:DEFAULT

GATEWAY.

6PressMENU/EXIT.

!The fax machine takes 5 seconds to reconfigure after pressing the MENU/EXIT key. Do not turn the machine off during this period. If you select another setting during the configuration period, ìFUNC. NOT AVAIL.î displays.

Printing a Configuration Page from the fax machine Front Panel

1At the fax machine front panel, press the MENU key.

2Use the arrow keys to select 8:REPORT PRINT, then press Enter, then move the cursor to 9:NIC

CONFIGURATION.

3Press ENTER.

The configuration page prints.

14 Network print server

Image 14
Contents User’s Guide 59324102Network print server Contents Novell NetWare TroubleshootingSpecifications Index Network print server IntroductionComponents Adapter CardHP JetAdmin and Web JetAdmin Support OKI Print Monitor UtilityNetwork print server Installation Network print server Stat Light red LED 100BASE-TX/10BASE-T ConnectorNetwork Print Server Part Names Link 100M Light green LED, center Link 10M Light green LED, near cableNetwork Print Server Configuration Setting Up the Network Print Server Using OkiviewStatus Okiview 32 Printer PanelOkiview 32 Printer Properties Menu Network PropertiesNovell Information Panel Novell ConfigurationNovell List Panel Changing the Printerís Name and LocationPressMENU/EXIT IP Address SetupRepeat for 84SUBNET Mask and 85DEFAULT Using the Network print server Web T p / / 1 9 3 3 2 NetWare Settings SettingsTCP/IP Settings Print Server ModeEtherTalk Settings File Servers per Pserver ModeNetBEUI Settings MIB-II Category Connecting Using TCP/IPSnmp Settings Printer MenuPrinter Address Subnet Mask Using TelnetConnecting One Printer and One Computer Arp -s 192.168.20.127 0080920011BC tempSettings Main screen Root password Back to prior menu Please select 1 99? TCP/IP setup screenDHCP/BOOTP protocol Snmp setup screenNetWare print server mode setup screen NetWare setup screenPacket type 802.3 NetWare mode Please select 1-99? Message Value NetWare protocolZone Name Back to prior menu Please select 1 99? Message Value Pserver name Job timeout Back to prior menuPlease select 1-99? Message Value EtherTalk protocol Please select 1-99? Message Value Trap enable Resetting the fax machinePrinter trap setup screen Trap typeAdd Printer Driver Windows PrintingOverview Network Print Server Setup for Windows Network print server User’s Guide English Network print server Add the LPR Port Network print server Printer Selection Pop-Up MonitorTask Tray Monitor Screen Always display on topSetup Dialog Status MonitoringPop-Up Conditions Display User’s Guide English Novell NetWare Print Server ModeRemote Printer Mode IntroductionClick Novell Setting up the Network Print Server UsingBindery Printing Verifying that the Printer is Connected Novell Directory Services NDSSetting up the Network Print Server using Okiview Click Add/Delete Queue Click Change ContextClick OK Click OK. Then Click OK in the Printer PropertiesAdd Printer Wizard will start Novell Distributed Print Services NdpsSetting up the Clients Fax machine does not print via lpr or ftp TroubleshootingFax machine cannot find the network print server Problems printing via NetWare User name in bannerFax machine does not print If the Eeprom check result is NG Problems printing self diagnostics test and configurationIf the ROM check or RAM check result is NG no good If NIC Check is marked with NGNetwork print server Status Lights Network Protocol SpecificationsNetwork Interface FunctionsIndex Network print server