Oki 7100e+ manual Fax machine does not print, Remote printer mode

Page 45

The fax machine is recognized by utility but cannot establish connection with NetWare server

Remote printer mode

•Check that the print server for which the unit has been registered has been started up.

•Check that the correct print server name has been selected. Check that the name of the print server operating on the file server is the same as the print server name set on the fax machine’s print server.

•Check that the correct NetWare port name has been selected. Check that the fax machine name (shown on the print server monitor of the file server) is the same as the NetWare port name set on the print server card in the fax machine. If there are several network print servers, set the NetWare port names so that they are different from each other.

Print server mode

•Check to see that the network print server is logged onto the NetWare server.

•Make sure that the correct file server name has been selected. Check that the file server name you use is the same as the file server name selected for the network print server.

•Make sure that the correct NetWare port name has been selected. Check that the fax machine name set on the file server is the same as the NetWare port name set on the network print server. If there are several network print servers, set the NetWare port names so that they are different from each other.

•Check that the NetWare login password matches the set password.

•Check that the machine name for the network print server is the same as the print server name set on the file server.

Fax machine does not print

•Make sure that the network cable is properly connected. Replace it if necessary.

•Make sure that the fax machine is switched on. If it is on, switch it off and then on.

User’s Guide: English 45

Image 45

Contents 59324102 User’s GuideNetwork print server Contents Troubleshooting Specifications IndexNovell NetWare Components IntroductionNetwork print server Adapter CardOKI Print Monitor Utility HP JetAdmin and Web JetAdmin SupportNetwork print server Installation Network print server 100BASE-TX/10BASE-T Connector Network Print Server Part NamesStat Light red LED Link 10M Light green LED, near cable Link 100M Light green LED, centerSetting Up the Network Print Server Using Okiview Network Print Server ConfigurationOkiview 32 Printer Properties Menu Okiview 32 Printer PanelStatus Network PropertiesNovell List Panel Novell ConfigurationNovell Information Panel Changing the Printerís Name and LocationIP Address Setup Repeat for 84SUBNET Mask and 85DEFAULTPressMENU/EXIT Using the Network print server Web T p / / 1 9 3 3 2 TCP/IP Settings SettingsNetWare Settings Print Server ModeFile Servers per Pserver Mode NetBEUI SettingsEtherTalk Settings Snmp Settings Connecting Using TCP/IPMIB-II Category Printer MenuConnecting One Printer and One Computer Using TelnetPrinter Address Subnet Mask Arp -s 192.168.20.127 0080920011BC tempSettings Main screen DHCP/BOOTP protocol TCP/IP setup screenRoot password Back to prior menu Please select 1 99? Snmp setup screenPacket type 802.3 NetWare mode NetWare setup screenNetWare print server mode setup screen Please select 1-99? Message Value NetWare protocolMessage Value Pserver name Job timeout Back to prior menu Please select 1-99? Message Value EtherTalk protocolZone Name Back to prior menu Please select 1 99? Printer trap setup screen Resetting the fax machinePlease select 1-99? Message Value Trap enable Trap typeWindows Printing OverviewAdd Printer Driver Network Print Server Setup for Windows Network print server User’s Guide English Network print server Add the LPR Port Network print server Pop-Up Monitor Task TrayPrinter Selection Always display on top Monitor ScreenStatus Monitoring Setup DialogPop-Up Conditions Display User’s Guide English Remote Printer Mode Print Server ModeNovell NetWare IntroductionSetting up the Network Print Server Using Bindery PrintingClick Novell Novell Directory Services NDS Setting up the Network Print Server using OkiviewVerifying that the Printer is Connected Click OK Click Change ContextClick Add/Delete Queue Click OK. Then Click OK in the Printer PropertiesNovell Distributed Print Services Ndps Setting up the ClientsAdd Printer Wizard will start Troubleshooting Fax machine cannot find the network print serverFax machine does not print via lpr or ftp User name in banner Problems printing via NetWareFax machine does not print If the ROM check or RAM check result is NG no good Problems printing self diagnostics test and configurationIf the Eeprom check result is NG If NIC Check is marked with NGNetwork print server Status Lights Network Interface SpecificationsNetwork Protocol FunctionsIndex Network print server