Oki 7100e+ manual Setup Dialog, Status Monitoring

Page 35

Setup Dialog

The setup dialog lets you select a print server to monitor, set the Pop-Up Monitor configuration and screen related settings.

Status Monitoring

In this screen, you can select the print server you wish to monitor. You cannot select the IP address that is already selected. If you click Search, OKI Print Monitor searches for new OKI Devices on the network.

To set the Broadcast IP address of the network to search, click Search Path…. The following screen appears.

To add an IP address, enter the new IP address in the box next to Add and click Add. The maximum number of IP addresses that can be monitored is 16.

If you wish to delete an IP address, enter that IP address from the search list next to Delete and click Delete.

User’s Guide: English 35

Image 35

Contents 59324102 User’s GuideNetwork print server Contents Novell NetWare TroubleshootingSpecifications Index Adapter Card IntroductionComponents Network print serverOKI Print Monitor Utility HP JetAdmin and Web JetAdmin SupportNetwork print server Installation Network print server Stat Light red LED 100BASE-TX/10BASE-T ConnectorNetwork Print Server Part Names Link 10M Light green LED, near cable Link 100M Light green LED, centerSetting Up the Network Print Server Using Okiview Network Print Server ConfigurationNetwork Properties Okiview 32 Printer PanelOkiview 32 Printer Properties Menu StatusChanging the Printerís Name and Location Novell ConfigurationNovell List Panel Novell Information PanelPressMENU/EXIT IP Address SetupRepeat for 84SUBNET Mask and 85DEFAULT Using the Network print server Web T p / / 1 9 3 3 2 Print Server Mode SettingsTCP/IP Settings NetWare SettingsEtherTalk Settings File Servers per Pserver ModeNetBEUI Settings Printer Menu Connecting Using TCP/IPSnmp Settings MIB-II CategoryArp -s 192.168.20.127 0080920011BC temp Using TelnetConnecting One Printer and One Computer Printer Address Subnet MaskSettings Main screen Snmp setup screen TCP/IP setup screenDHCP/BOOTP protocol Root password Back to prior menu Please select 1 99?Please select 1-99? Message Value NetWare protocol NetWare setup screenPacket type 802.3 NetWare mode NetWare print server mode setup screenZone Name Back to prior menu Please select 1 99? Message Value Pserver name Job timeout Back to prior menuPlease select 1-99? Message Value EtherTalk protocol Trap type Resetting the fax machinePrinter trap setup screen Please select 1-99? Message Value Trap enableAdd Printer Driver Windows PrintingOverview Network Print Server Setup for Windows Network print server User’s Guide English Network print server Add the LPR Port Network print server Printer Selection Pop-Up MonitorTask Tray Always display on top Monitor ScreenStatus Monitoring Setup DialogPop-Up Conditions Display User’s Guide English Introduction Print Server ModeRemote Printer Mode Novell NetWareClick Novell Setting up the Network Print Server UsingBindery Printing Verifying that the Printer is Connected Novell Directory Services NDSSetting up the Network Print Server using Okiview Click OK. Then Click OK in the Printer Properties Click Change ContextClick OK Click Add/Delete QueueAdd Printer Wizard will start Novell Distributed Print Services NdpsSetting up the Clients Fax machine does not print via lpr or ftp TroubleshootingFax machine cannot find the network print server User name in banner Problems printing via NetWareFax machine does not print If NIC Check is marked with NG Problems printing self diagnostics test and configurationIf the ROM check or RAM check result is NG no good If the Eeprom check result is NGNetwork print server Status Lights Functions SpecificationsNetwork Interface Network ProtocolIndex Network print server