Oki 7100e+ manual Pop-Up Monitor, Task Tray, Printer Selection

Page 33

Pop-Up Monitor

Task Tray

The Pop-Up Monitor shows current printer status on your computer screen.

When active, the Pop-Up Monitor resides in the Task Tray. If you have already designated the printer(s) to be monitored, the printer status and the host name (or just the IP address if the host name is not assigned) are shown on the Pop-Up menu. If you select the host name (or IP address) in the menu, the Monitor screen appears (see “Monitor Screen” below).

If you want to add a printer to the menu, click Select Printer… to select the printer to be monitored.

If you select Quit, Pop-Up Monitor is removed from the Task Tray.

Printer Selection

When you click Select Printer… in the Task Tray menu, the following screen appears:

In this screen you select which printer(s) you want to monitor. You cannot select the IP address that is already selected. If you click Search, OKI Print Monitor searches for new OKI print devices on the network.

To set the Broadcast IP address of the network to search, click Search Path…. The following screen appears.

User’s Guide: English 33

Image 33

Contents 59324102 User’s GuideNetwork print server Contents Troubleshooting Specifications IndexNovell NetWare Components IntroductionNetwork print server Adapter CardOKI Print Monitor Utility HP JetAdmin and Web JetAdmin SupportNetwork print server Installation Network print server 100BASE-TX/10BASE-T Connector Network Print Server Part NamesStat Light red LED Link 10M Light green LED, near cable Link 100M Light green LED, centerSetting Up the Network Print Server Using Okiview Network Print Server ConfigurationOkiview 32 Printer Properties Menu Okiview 32 Printer PanelStatus Network PropertiesNovell List Panel Novell ConfigurationNovell Information Panel Changing the Printerís Name and LocationIP Address Setup Repeat for 84SUBNET Mask and 85DEFAULTPressMENU/EXIT Using the Network print server Web T p / / 1 9 3 3 2 TCP/IP Settings SettingsNetWare Settings Print Server ModeFile Servers per Pserver Mode NetBEUI SettingsEtherTalk Settings Snmp Settings Connecting Using TCP/IPMIB-II Category Printer MenuConnecting One Printer and One Computer Using TelnetPrinter Address Subnet Mask Arp -s 192.168.20.127 0080920011BC tempSettings Main screen DHCP/BOOTP protocol TCP/IP setup screenRoot password Back to prior menu Please select 1 99? Snmp setup screenPacket type 802.3 NetWare mode NetWare setup screenNetWare print server mode setup screen Please select 1-99? Message Value NetWare protocolMessage Value Pserver name Job timeout Back to prior menu Please select 1-99? Message Value EtherTalk protocolZone Name Back to prior menu Please select 1 99? Printer trap setup screen Resetting the fax machinePlease select 1-99? Message Value Trap enable Trap typeWindows Printing OverviewAdd Printer Driver Network Print Server Setup for Windows Network print server User’s Guide English Network print server Add the LPR Port Network print server Pop-Up Monitor Task TrayPrinter Selection Always display on top Monitor ScreenStatus Monitoring Setup DialogPop-Up Conditions Display User’s Guide English Remote Printer Mode Print Server ModeNovell NetWare IntroductionSetting up the Network Print Server Using Bindery PrintingClick Novell Novell Directory Services NDS Setting up the Network Print Server using OkiviewVerifying that the Printer is Connected Click OK Click Change ContextClick Add/Delete Queue Click OK. Then Click OK in the Printer PropertiesNovell Distributed Print Services Ndps Setting up the ClientsAdd Printer Wizard will start Troubleshooting Fax machine cannot find the network print serverFax machine does not print via lpr or ftp User name in banner Problems printing via NetWareFax machine does not print If the ROM check or RAM check result is NG no good Problems printing self diagnostics test and configurationIf the Eeprom check result is NG If NIC Check is marked with NGNetwork print server Status Lights Network Interface SpecificationsNetwork Protocol FunctionsIndex Network print server