Oki 7100e+ manual Problems printing self diagnostics test and configuration

Page 46

Problems printing self diagnostics test and configuration

Fax machine does not print

•Check that DIP switches 3 (configuration printing) and 4

(self-diagnostics testing) have been turned on. Turn the fax machine off before changing the DIP switch settings.

•If the fax machine is on-line, turn the power switch off and then on.

NG printed in self-diagnostics test results

If the ROM check or RAM check result is NG (no good).

•After checking that the network print server is installed correctly, switch the fax machine off and then on.

If the EEPROM check result is NG.

•After checking that the network print server is installed correctly, switch the fax machine off and then on.

•Turn DIP switch 2 to the ON position to initialize the network print server print server. Retest after resetting.

If NIC Check is marked with NG.

•After checking that the network print server is installed correctly, switch the fax machine off and then on.

•Check that the network cable is properly connected. Try connecting the fax machine to a network in another segment if possible. Also, try another cable.

If the fax machine prints a different network format from that of the network to which it is connected.

•After checking that the network cable is properly connected, switch the fax machine off and then on.

•Replace the network cable connected to the fax machine and switch the fax machine off and then on.

46 Network print server

Image 46

Contents User’s Guide 59324102Network print server Contents Specifications Index TroubleshootingNovell NetWare Network print server IntroductionComponents Adapter CardHP JetAdmin and Web JetAdmin Support OKI Print Monitor UtilityNetwork print server Installation Network print server Network Print Server Part Names 100BASE-TX/10BASE-T ConnectorStat Light red LED Link 100M Light green LED, center Link 10M Light green LED, near cableNetwork Print Server Configuration Setting Up the Network Print Server Using OkiviewStatus Okiview 32 Printer PanelOkiview 32 Printer Properties Menu Network PropertiesNovell Information Panel Novell ConfigurationNovell List Panel Changing the Printerís Name and LocationRepeat for 84SUBNET Mask and 85DEFAULT IP Address SetupPressMENU/EXIT Using the Network print server Web T p / / 1 9 3 3 2 NetWare Settings SettingsTCP/IP Settings Print Server ModeNetBEUI Settings File Servers per Pserver ModeEtherTalk Settings MIB-II Category Connecting Using TCP/IPSnmp Settings Printer MenuPrinter Address Subnet Mask Using TelnetConnecting One Printer and One Computer Arp -s 192.168.20.127 0080920011BC tempSettings Main screen Root password Back to prior menu Please select 1 99? TCP/IP setup screenDHCP/BOOTP protocol Snmp setup screenNetWare print server mode setup screen NetWare setup screenPacket type 802.3 NetWare mode Please select 1-99? Message Value NetWare protocolPlease select 1-99? Message Value EtherTalk protocol Message Value Pserver name Job timeout Back to prior menuZone Name Back to prior menu Please select 1 99? Please select 1-99? Message Value Trap enable Resetting the fax machinePrinter trap setup screen Trap typeOverview Windows PrintingAdd Printer Driver Network Print Server Setup for Windows Network print server User’s Guide English Network print server Add the LPR Port Network print server Task Tray Pop-Up MonitorPrinter Selection Monitor Screen Always display on topSetup Dialog Status MonitoringPop-Up Conditions Display User’s Guide English Novell NetWare Print Server ModeRemote Printer Mode IntroductionBindery Printing Setting up the Network Print Server UsingClick Novell Setting up the Network Print Server using Okiview Novell Directory Services NDSVerifying that the Printer is Connected Click Add/Delete Queue Click Change ContextClick OK Click OK. Then Click OK in the Printer PropertiesSetting up the Clients Novell Distributed Print Services NdpsAdd Printer Wizard will start Fax machine cannot find the network print server TroubleshootingFax machine does not print via lpr or ftp Problems printing via NetWare User name in bannerFax machine does not print If the Eeprom check result is NG Problems printing self diagnostics test and configurationIf the ROM check or RAM check result is NG no good If NIC Check is marked with NGNetwork print server Status Lights Network Protocol SpecificationsNetwork Interface FunctionsIndex Network print server