Oki 7100e+ manual Novell Directory Services NDS, Verifying that the Printer is Connected

Page 40

9Highlight the server you created and click Add/Delete Queue. The Add Queue dialog appears.

10Check the desired queue or click New Queue to create a new queue and click OK.

11Click Apply.

12Click OK.

13Click Yes to reset the printer.

!The fax machine must be reset for your setup to take effect.

It may take a few minutes for the configuration to become valid. The queue’s icon changes from gray to full color when the configuration is complete.

Verifying that the Printer is Connected

After you configure the network print server, you can verify that your fax machine has made a connection to the NetWare server. You can do this at the NetWare server itself.

1At the server prompt type LOAD MONITOR.

2When the NetWare monitor loads under Available Options, select Connection Information.

3The Active Connections box opens. In this box, look for the Print Server name that was specified in OKIVIEW 32.

4If the Print Server name is there, your connection is made and you are ready to set up your clients.

Novell Directory Services (NDS)

OKIVIEW 32, creates the Print Server, Print Queues and Printer objects for you to make setting up you printer effortless.

!NDS is not supported by NetWare 3.x and lower versions.

Setting up the Network Print Server using OKIVIEW 32

You must log on to the NDS network from a Windows 95/98 or NT NetWare client with an account with administrative privileges.

1Open OKIVIEW 32. The main screen displays all of the print servers on the network, along with their status.

40 Network print server

Image 40
Contents User’s Guide 59324102Network print server Contents Specifications Index TroubleshootingNovell NetWare Introduction ComponentsNetwork print server Adapter CardHP JetAdmin and Web JetAdmin Support OKI Print Monitor UtilityNetwork print server Installation Network print server Network Print Server Part Names 100BASE-TX/10BASE-T ConnectorStat Light red LED Link 100M Light green LED, center Link 10M Light green LED, near cableNetwork Print Server Configuration Setting Up the Network Print Server Using OkiviewOkiview 32 Printer Panel Okiview 32 Printer Properties MenuStatus Network PropertiesNovell Configuration Novell List PanelNovell Information Panel Changing the Printerís Name and LocationRepeat for 84SUBNET Mask and 85DEFAULT IP Address SetupPressMENU/EXIT Using the Network print server Web T p / / 1 9 3 3 2 Settings TCP/IP SettingsNetWare Settings Print Server ModeNetBEUI Settings File Servers per Pserver ModeEtherTalk Settings Connecting Using TCP/IP Snmp SettingsMIB-II Category Printer MenuUsing Telnet Connecting One Printer and One ComputerPrinter Address Subnet Mask Arp -s 192.168.20.127 0080920011BC tempSettings Main screen TCP/IP setup screen DHCP/BOOTP protocolRoot password Back to prior menu Please select 1 99? Snmp setup screenNetWare setup screen Packet type 802.3 NetWare modeNetWare print server mode setup screen Please select 1-99? Message Value NetWare protocolPlease select 1-99? Message Value EtherTalk protocol Message Value Pserver name Job timeout Back to prior menuZone Name Back to prior menu Please select 1 99? Resetting the fax machine Printer trap setup screenPlease select 1-99? Message Value Trap enable Trap typeOverview Windows PrintingAdd Printer Driver Network Print Server Setup for Windows Network print server User’s Guide English Network print server Add the LPR Port Network print server Task Tray Pop-Up MonitorPrinter Selection Monitor Screen Always display on topSetup Dialog Status MonitoringPop-Up Conditions Display User’s Guide English Print Server Mode Remote Printer ModeNovell NetWare IntroductionBindery Printing Setting up the Network Print Server UsingClick Novell Setting up the Network Print Server using Okiview Novell Directory Services NDSVerifying that the Printer is Connected Click Change Context Click OKClick Add/Delete Queue Click OK. Then Click OK in the Printer PropertiesSetting up the Clients Novell Distributed Print Services NdpsAdd Printer Wizard will start Fax machine cannot find the network print server TroubleshootingFax machine does not print via lpr or ftp Problems printing via NetWare User name in bannerFax machine does not print Problems printing self diagnostics test and configuration If the ROM check or RAM check result is NG no goodIf the Eeprom check result is NG If NIC Check is marked with NGNetwork print server Status Lights Specifications Network InterfaceNetwork Protocol FunctionsIndex Network print server