Oki 7100e+ manual Bindery Printing, Setting up the Network Print Server Using, Click Novell

Page 39

This mode uses the standard NetWare print function (PSERVER.NLM). The existing print server can be used. For PSERVER.NLM, the file server functions as a print server.

1Open OKIVIEW 32. The main screen displays all of the print servers on the network, along with their status.

Bindery Printing

This connection method is common with NetWare 3.x, but is also supported by NetWare 4.x and NetWare5.

Setting up the Network Print Server Using

OKIVIEW 32

Log onto the network from a Windows 95, 98 or Windows NT NetWare client while using Novell’s NetWare Client, a bindery connection, and an account with administrative

privileges.

2 Highlight the new target printer, then double-click it. The Printer Properties dialog appears.

3 Click Novell.

4 Select Q-Serveras the Print Server Type.

5 Highlight Bindery in the tree.

6 Click Modify Name or use the default name.

7 Click Add File Server. The Add File Server dialog appears.

8 Check the desired server and click OK.

User’s Guide: English 39

Image 39

Contents 59324102 User’s GuideNetwork print server Contents Troubleshooting Specifications IndexNovell NetWare Adapter Card IntroductionComponents Network print serverOKI Print Monitor Utility HP JetAdmin and Web JetAdmin SupportNetwork print server Installation Network print server 100BASE-TX/10BASE-T Connector Network Print Server Part NamesStat Light red LED Link 10M Light green LED, near cable Link 100M Light green LED, centerSetting Up the Network Print Server Using Okiview Network Print Server ConfigurationNetwork Properties Okiview 32 Printer PanelOkiview 32 Printer Properties Menu StatusChanging the Printerís Name and Location Novell ConfigurationNovell List Panel Novell Information PanelIP Address Setup Repeat for 84SUBNET Mask and 85DEFAULTPressMENU/EXIT Using the Network print server Web T p / / 1 9 3 3 2 Print Server Mode SettingsTCP/IP Settings NetWare SettingsFile Servers per Pserver Mode NetBEUI SettingsEtherTalk Settings Printer Menu Connecting Using TCP/IPSnmp Settings MIB-II CategoryArp -s 192.168.20.127 0080920011BC temp Using TelnetConnecting One Printer and One Computer Printer Address Subnet MaskSettings Main screen Snmp setup screen TCP/IP setup screenDHCP/BOOTP protocol Root password Back to prior menu Please select 1 99?Please select 1-99? Message Value NetWare protocol NetWare setup screenPacket type 802.3 NetWare mode NetWare print server mode setup screenMessage Value Pserver name Job timeout Back to prior menu Please select 1-99? Message Value EtherTalk protocolZone Name Back to prior menu Please select 1 99? Trap type Resetting the fax machinePrinter trap setup screen Please select 1-99? Message Value Trap enableWindows Printing OverviewAdd Printer Driver Network Print Server Setup for Windows Network print server User’s Guide English Network print server Add the LPR Port Network print server Pop-Up Monitor Task TrayPrinter Selection Always display on top Monitor ScreenStatus Monitoring Setup DialogPop-Up Conditions Display User’s Guide English Introduction Print Server ModeRemote Printer Mode Novell NetWareSetting up the Network Print Server Using Bindery PrintingClick Novell Novell Directory Services NDS Setting up the Network Print Server using OkiviewVerifying that the Printer is Connected Click OK. Then Click OK in the Printer Properties Click Change ContextClick OK Click Add/Delete QueueNovell Distributed Print Services Ndps Setting up the ClientsAdd Printer Wizard will start Troubleshooting Fax machine cannot find the network print serverFax machine does not print via lpr or ftp User name in banner Problems printing via NetWareFax machine does not print If NIC Check is marked with NG Problems printing self diagnostics test and configurationIf the ROM check or RAM check result is NG no good If the Eeprom check result is NGNetwork print server Status Lights Functions SpecificationsNetwork Interface Network ProtocolIndex Network print server