Oki 7100e+ manual Click Change Context, Click OK, Click Add/Delete Queue

Page 41

2Highlight the new target machine, then double-click it. The Printer Properties dialog appears.

3Click Novell.

4Select Q-Serveras the Print Server Type.

5Highlight NDS.

6Click Modify Name or use the default name (recommended).

7Click Change Context.

8In the Set and Change Context window click the “Tree” icon.

9Select a tree. Click OK

10Click the “Container” icon.

11 Select a container. Click OK.

12 Click OK.

13 Under NDS, select the container.

14 Click Add/Delete Queue.

15 Select a queue or click New Queue to create a new queue.

16 Click OK. Then Click OK in the Printer Properties.

!The fax machine must be reset for your setup to take effect.

It may take a few minutes for the configuration to become valid. OKIVIEW 32 creates the printer objects for you in NDS. The queue’s icon changes from gray to full color when the configuration is complete. Novell’s NetWare Administrator is the most common way to verify that the printer objects were successfully created and to administer access rights to the new printer objects. NetWare Administrator can be found on your NetWare server in the Public directory or sub-directory below Public. For more information on NetWare Administrator and access rights, please refer to your NetWare documentation.

User’s Guide: English 41

Image 41
Contents 59324102 User’s GuideNetwork print server Contents Novell NetWare TroubleshootingSpecifications Index Components IntroductionNetwork print server Adapter CardOKI Print Monitor Utility HP JetAdmin and Web JetAdmin SupportNetwork print server Installation Network print server Stat Light red LED 100BASE-TX/10BASE-T ConnectorNetwork Print Server Part Names Link 10M Light green LED, near cable Link 100M Light green LED, centerSetting Up the Network Print Server Using Okiview Network Print Server ConfigurationOkiview 32 Printer Properties Menu Okiview 32 Printer PanelStatus Network PropertiesNovell List Panel Novell ConfigurationNovell Information Panel Changing the Printerís Name and LocationPressMENU/EXIT IP Address SetupRepeat for 84SUBNET Mask and 85DEFAULT Using the Network print server Web T p / / 1 9 3 3 2 TCP/IP Settings SettingsNetWare Settings Print Server ModeEtherTalk Settings File Servers per Pserver ModeNetBEUI Settings Snmp Settings Connecting Using TCP/IPMIB-II Category Printer MenuConnecting One Printer and One Computer Using TelnetPrinter Address Subnet Mask Arp -s 192.168.20.127 0080920011BC tempSettings Main screen DHCP/BOOTP protocol TCP/IP setup screenRoot password Back to prior menu Please select 1 99? Snmp setup screenPacket type 802.3 NetWare mode NetWare setup screenNetWare print server mode setup screen Please select 1-99? Message Value NetWare protocolZone Name Back to prior menu Please select 1 99? Message Value Pserver name Job timeout Back to prior menuPlease select 1-99? Message Value EtherTalk protocol Printer trap setup screen Resetting the fax machinePlease select 1-99? Message Value Trap enable Trap typeAdd Printer Driver Windows PrintingOverview Network Print Server Setup for Windows Network print server User’s Guide English Network print server Add the LPR Port Network print server Printer Selection Pop-Up MonitorTask Tray Always display on top Monitor ScreenStatus Monitoring Setup DialogPop-Up Conditions Display User’s Guide English Remote Printer Mode Print Server ModeNovell NetWare IntroductionClick Novell Setting up the Network Print Server UsingBindery Printing Verifying that the Printer is Connected Novell Directory Services NDSSetting up the Network Print Server using Okiview Click OK Click Change ContextClick Add/Delete Queue Click OK. Then Click OK in the Printer PropertiesAdd Printer Wizard will start Novell Distributed Print Services NdpsSetting up the Clients Fax machine does not print via lpr or ftp TroubleshootingFax machine cannot find the network print server User name in banner Problems printing via NetWareFax machine does not print If the ROM check or RAM check result is NG no good Problems printing self diagnostics test and configurationIf the Eeprom check result is NG If NIC Check is marked with NGNetwork print server Status Lights Network Interface SpecificationsNetwork Protocol FunctionsIndex Network print server