Oki 7100e+ manual Network print server

Page 30

This screen lets you select where in the Start Menu you can place the shortcut to the OKI Print Monitor.

8Click Next. The OKI Print Monitor files are copied into your computer. When copying is completed, the following screen appears.

This screen notifies you that the installation is complete and asks if you wish to add the LPR port now.

If you click Yes and Finish, you will be prompted to add an LPR Port (see ìAdd the LPR Portî below).

If you click No and Finish, the installation process ends.

30 Network print server

Image 30
Contents User’s Guide 59324102Network print server Contents Troubleshooting Specifications IndexNovell NetWare Network print server IntroductionComponents Adapter CardHP JetAdmin and Web JetAdmin Support OKI Print Monitor UtilityNetwork print server Installation Network print server 100BASE-TX/10BASE-T Connector Network Print Server Part NamesStat Light red LED Link 100M Light green LED, center Link 10M Light green LED, near cableNetwork Print Server Configuration Setting Up the Network Print Server Using OkiviewStatus Okiview 32 Printer PanelOkiview 32 Printer Properties Menu Network PropertiesNovell Information Panel Novell ConfigurationNovell List Panel Changing the Printerís Name and LocationIP Address Setup Repeat for 84SUBNET Mask and 85DEFAULTPressMENU/EXIT Using the Network print server Web T p / / 1 9 3 3 2 NetWare Settings SettingsTCP/IP Settings Print Server ModeFile Servers per Pserver Mode NetBEUI SettingsEtherTalk Settings MIB-II Category Connecting Using TCP/IPSnmp Settings Printer MenuPrinter Address Subnet Mask Using TelnetConnecting One Printer and One Computer Arp -s 192.168.20.127 0080920011BC tempSettings Main screen Root password Back to prior menu Please select 1 99? TCP/IP setup screenDHCP/BOOTP protocol Snmp setup screenNetWare print server mode setup screen NetWare setup screenPacket type 802.3 NetWare mode Please select 1-99? Message Value NetWare protocolMessage Value Pserver name Job timeout Back to prior menu Please select 1-99? Message Value EtherTalk protocolZone Name Back to prior menu Please select 1 99? Please select 1-99? Message Value Trap enable Resetting the fax machinePrinter trap setup screen Trap typeWindows Printing OverviewAdd Printer Driver Network Print Server Setup for Windows Network print server User’s Guide English Network print server Add the LPR Port Network print server Pop-Up Monitor Task TrayPrinter Selection Monitor Screen Always display on topSetup Dialog Status MonitoringPop-Up Conditions Display User’s Guide English Novell NetWare Print Server ModeRemote Printer Mode IntroductionSetting up the Network Print Server Using Bindery PrintingClick Novell Novell Directory Services NDS Setting up the Network Print Server using OkiviewVerifying that the Printer is Connected Click Add/Delete Queue Click Change ContextClick OK Click OK. Then Click OK in the Printer PropertiesNovell Distributed Print Services Ndps Setting up the ClientsAdd Printer Wizard will start Troubleshooting Fax machine cannot find the network print serverFax machine does not print via lpr or ftp Problems printing via NetWare User name in bannerFax machine does not print If the Eeprom check result is NG Problems printing self diagnostics test and configurationIf the ROM check or RAM check result is NG no good If NIC Check is marked with NGNetwork print server Status Lights Network Protocol SpecificationsNetwork Interface FunctionsIndex Network print server