Oki 7100e+ manual Add the LPR Port

Page 31

Add the LPR Port

1After the OKI Print Monitor is installed, the port setting function is activated.

Enter the IP address or host name of the print server. If you click Search, the list of OKI Device printers on the network appears.

Select the OKI device from the list (machine type for the NETWORK PRINT SERVER is ìMLETB08î). Then click OK.

2Click Next. OKI Print Monitor attempts to

communicate with the NETWORK PRINT SERVER at the specified address. If the physical port name is ìlp,î the screen shifts to the print port name input screen (see next step). Otherwise if there is no response, the following screen appears.

User’s Guide: English 31

Image 31

Contents 59324102 User’s GuideNetwork print server Contents Specifications Index TroubleshootingNovell NetWare Adapter Card IntroductionComponents Network print serverOKI Print Monitor Utility HP JetAdmin and Web JetAdmin SupportNetwork print server Installation Network print server Network Print Server Part Names 100BASE-TX/10BASE-T ConnectorStat Light red LED Link 10M Light green LED, near cable Link 100M Light green LED, centerSetting Up the Network Print Server Using Okiview Network Print Server ConfigurationNetwork Properties Okiview 32 Printer PanelOkiview 32 Printer Properties Menu StatusChanging the Printerís Name and Location Novell ConfigurationNovell List Panel Novell Information PanelRepeat for 84SUBNET Mask and 85DEFAULT IP Address SetupPressMENU/EXIT Using the Network print server Web T p / / 1 9 3 3 2 Print Server Mode SettingsTCP/IP Settings NetWare SettingsNetBEUI Settings File Servers per Pserver ModeEtherTalk Settings Printer Menu Connecting Using TCP/IPSnmp Settings MIB-II CategoryArp -s 192.168.20.127 0080920011BC temp Using TelnetConnecting One Printer and One Computer Printer Address Subnet MaskSettings Main screen Snmp setup screen TCP/IP setup screenDHCP/BOOTP protocol Root password Back to prior menu Please select 1 99?Please select 1-99? Message Value NetWare protocol NetWare setup screenPacket type 802.3 NetWare mode NetWare print server mode setup screenPlease select 1-99? Message Value EtherTalk protocol Message Value Pserver name Job timeout Back to prior menuZone Name Back to prior menu Please select 1 99? Trap type Resetting the fax machinePrinter trap setup screen Please select 1-99? Message Value Trap enableOverview Windows PrintingAdd Printer Driver Network Print Server Setup for Windows Network print server User’s Guide English Network print server Add the LPR Port Network print server Task Tray Pop-Up MonitorPrinter Selection Always display on top Monitor ScreenStatus Monitoring Setup DialogPop-Up Conditions Display User’s Guide English Introduction Print Server ModeRemote Printer Mode Novell NetWareBindery Printing Setting up the Network Print Server UsingClick Novell Setting up the Network Print Server using Okiview Novell Directory Services NDSVerifying that the Printer is Connected Click OK. Then Click OK in the Printer Properties Click Change ContextClick OK Click Add/Delete QueueSetting up the Clients Novell Distributed Print Services NdpsAdd Printer Wizard will start Fax machine cannot find the network print server TroubleshootingFax machine does not print via lpr or ftp User name in banner Problems printing via NetWareFax machine does not print If NIC Check is marked with NG Problems printing self diagnostics test and configurationIf the ROM check or RAM check result is NG no good If the Eeprom check result is NGNetwork print server Status Lights Functions SpecificationsNetwork Interface Network ProtocolIndex Network print server