Oki 7100e+ manual Resetting the fax machine, Printer trap setup screen, Trap type

Page 25

10 :	Page length(line.)	: 66
11 :	Banner output	: NO
99 :	Back to prior menu

Please select (1 - 99)? _

Printer trap setup screen

Select [7] on the Main Screen to display this screen. Configure the printer trap.


Please select (1-99)? _7
No.		Message	Value
1	: Trap enable		: DISABLE
2	: Trap type		: LOCAL
3	: Trap address (UDP)		: 0.0.0.0
4	: Trap address (IPX)		: “00000000:000000000000”
99 :		Back to prior menu
Please select (1 - 99)? _

Resetting the fax machine

After selecting applicable settings through Telnet and exiting, reset the fax machine to make sure that your preferences were activated. To do this, simply turn it off, then turn it back on.

Then go to the front panel and print the diagnostics page to make sure your settings are correct.

User’s Guide: English 25

Image 25

Contents 59324102 User’s GuideNetwork print server Contents Specifications Index TroubleshootingNovell NetWare Components IntroductionNetwork print server Adapter CardOKI Print Monitor Utility HP JetAdmin and Web JetAdmin SupportNetwork print server Installation Network print server Network Print Server Part Names 100BASE-TX/10BASE-T ConnectorStat Light red LED Link 10M Light green LED, near cable Link 100M Light green LED, centerSetting Up the Network Print Server Using Okiview Network Print Server ConfigurationOkiview 32 Printer Properties Menu Okiview 32 Printer PanelStatus Network PropertiesNovell List Panel Novell ConfigurationNovell Information Panel Changing the Printerís Name and LocationRepeat for 84SUBNET Mask and 85DEFAULT IP Address SetupPressMENU/EXIT Using the Network print server Web T p / / 1 9 3 3 2 TCP/IP Settings SettingsNetWare Settings Print Server ModeNetBEUI Settings File Servers per Pserver ModeEtherTalk Settings Snmp Settings Connecting Using TCP/IPMIB-II Category Printer MenuConnecting One Printer and One Computer Using TelnetPrinter Address Subnet Mask Arp -s 192.168.20.127 0080920011BC tempSettings Main screen DHCP/BOOTP protocol TCP/IP setup screenRoot password Back to prior menu Please select 1 99? Snmp setup screenPacket type 802.3 NetWare mode NetWare setup screenNetWare print server mode setup screen Please select 1-99? Message Value NetWare protocolPlease select 1-99? Message Value EtherTalk protocol Message Value Pserver name Job timeout Back to prior menuZone Name Back to prior menu Please select 1 99? Printer trap setup screen Resetting the fax machinePlease select 1-99? Message Value Trap enable Trap typeOverview Windows PrintingAdd Printer Driver Network Print Server Setup for Windows Network print server User’s Guide English Network print server Add the LPR Port Network print server Task Tray Pop-Up MonitorPrinter Selection Always display on top Monitor ScreenStatus Monitoring Setup DialogPop-Up Conditions Display User’s Guide English Remote Printer Mode Print Server ModeNovell NetWare IntroductionBindery Printing Setting up the Network Print Server UsingClick Novell Setting up the Network Print Server using Okiview Novell Directory Services NDSVerifying that the Printer is Connected Click OK Click Change ContextClick Add/Delete Queue Click OK. Then Click OK in the Printer PropertiesSetting up the Clients Novell Distributed Print Services NdpsAdd Printer Wizard will start Fax machine cannot find the network print server TroubleshootingFax machine does not print via lpr or ftp User name in banner Problems printing via NetWareFax machine does not print If the ROM check or RAM check result is NG no good Problems printing self diagnostics test and configurationIf the Eeprom check result is NG If NIC Check is marked with NGNetwork print server Status Lights Network Interface SpecificationsNetwork Protocol FunctionsIndex Network print server