Oki 7100e+ manual Network Connection, TCP/IP Settings, NetWare Settings, Print Server Mode

Page 17

Settings

!Only some of the following settings may be applicable to your specific network environment.

Network Connection

Protocol Option–Lets you enable/disable each protocol.

Frame Options–Lets you set the frame type of the network.

TCP/IP Settings

DHCP/BOOTP–For the IP address to be dynamically configured using a DHCP/BOOTP server, set to [ENABLE]. To enter the IP address manually, set to [DISABLE].

RARP–For the IP address to be dynamically configured using a RARP server, set to [ENABLE]. To enter the IP address manually, set to [DISABLE].

IP Address, Subnet Mask, Default GateWay–Enter the IP address, subnet mask and default gateway assigned to the network print server using the decimal system in the following format: “***.***.***.***” If you use a DHCP/ BOOTP or RARP Server, these settings may not be required.

NetWare Settings

Printer Name–name of the fax machine.

NetWare Mode–Sets the network print server operating mode to print server mode (PSERVER) or remote printer mode (RPRINTER).

Print Server Mode

NetWare Print Server Name–Enter the print server name stored on the file server in print server mode. Make sure this name matches the “Print Server Name” stored on the file server. Maximum length: 31 characters.

Password–This is a password to log in to the file server in print server mode. Make sure this password is identical to that configured on the file server. Maximum length: 31 characters.

Job Polling Rate–Set the interval for polling the print queue in print server mode. The smaller the value, the greater the load on the network. The larger the value, the worse the printing response. The default value should normally be used. The setting may be between 2 –255 seconds.

Maximum Number of File Servers–Enter the number of file servers on the network.

Bindery Mode–In print server mode, if printing with NW4.1 bindery service or NW3.1, always set the bindery mode to [ENABLE]. If printing only with NW4.1 NDS service, set the bindery mode to [Disable].

User’s Guide: English 17

Image 17

Contents 59324102 User’s GuideNetwork print server Contents Novell NetWare TroubleshootingSpecifications Index Components IntroductionNetwork print server Adapter CardOKI Print Monitor Utility HP JetAdmin and Web JetAdmin SupportNetwork print server Installation Network print server Stat Light red LED 100BASE-TX/10BASE-T ConnectorNetwork Print Server Part Names Link 10M Light green LED, near cable Link 100M Light green LED, centerSetting Up the Network Print Server Using Okiview Network Print Server ConfigurationOkiview 32 Printer Properties Menu Okiview 32 Printer PanelStatus Network PropertiesNovell List Panel Novell ConfigurationNovell Information Panel Changing the Printerís Name and LocationPressMENU/EXIT IP Address SetupRepeat for 84SUBNET Mask and 85DEFAULT Using the Network print server Web T p / / 1 9 3 3 2 TCP/IP Settings SettingsNetWare Settings Print Server ModeEtherTalk Settings File Servers per Pserver ModeNetBEUI Settings Snmp Settings Connecting Using TCP/IPMIB-II Category Printer MenuConnecting One Printer and One Computer Using TelnetPrinter Address Subnet Mask Arp -s 192.168.20.127 0080920011BC tempSettings Main screen DHCP/BOOTP protocol TCP/IP setup screenRoot password Back to prior menu Please select 1 99? Snmp setup screenPacket type 802.3 NetWare mode NetWare setup screenNetWare print server mode setup screen Please select 1-99? Message Value NetWare protocolZone Name Back to prior menu Please select 1 99? Message Value Pserver name Job timeout Back to prior menuPlease select 1-99? Message Value EtherTalk protocol Printer trap setup screen Resetting the fax machinePlease select 1-99? Message Value Trap enable Trap typeAdd Printer Driver Windows PrintingOverview Network Print Server Setup for Windows Network print server User’s Guide English Network print server Add the LPR Port Network print server Printer Selection Pop-Up MonitorTask Tray Always display on top Monitor ScreenStatus Monitoring Setup DialogPop-Up Conditions Display User’s Guide English Remote Printer Mode Print Server ModeNovell NetWare IntroductionClick Novell Setting up the Network Print Server UsingBindery Printing Verifying that the Printer is Connected Novell Directory Services NDSSetting up the Network Print Server using Okiview Click OK Click Change ContextClick Add/Delete Queue Click OK. Then Click OK in the Printer PropertiesAdd Printer Wizard will start Novell Distributed Print Services NdpsSetting up the Clients Fax machine does not print via lpr or ftp TroubleshootingFax machine cannot find the network print server User name in banner Problems printing via NetWareFax machine does not print If the ROM check or RAM check result is NG no good Problems printing self diagnostics test and configurationIf the Eeprom check result is NG If NIC Check is marked with NGNetwork print server Status Lights Network Interface SpecificationsNetwork Protocol FunctionsIndex Network print server