Oki ii manual Admin manager, User is requested to enter their username and password

Page 15

•SNMP - See the manual for the network card.

•Internet Fax - The settings explained above can be entered here in addition to the following items, which are accessible only through the web:

(a)SMTP Transmit: Whether or not to enable SMTP transmission protocol. For normal operations, this setting should be left at

ENABLE.

(b)SMTP Receive: Whether or not to enable SMTP reception pro- tocol. This should normally be set at ENABLE. If you do not wish to receive by SMTP, change this setting to DISABLE.

Note:

SMTP reception is used to forward incoming mail by FAX.

(c)POP3: Whether or not to enable POP reception protocol. For normal operations, this setting should be left at ENABLE.

(d)SMTP port number: SMTP protocol port number. The default setting is 25. Do not change it unless necessary.

(e)POP port number: POP protocol port number. The default set- ting is 110. Do not change it unless necessary.

(f)Use APOP: Available when using a POP server that supports APOP. With APOP, the POP password will be encrypted before it is sent. If this setting is turned on when using a server, which does not support APOP, it will cause a communication error.

•Printer Menu (Paper and Trays, Timers and Alarms, Emulations) - This menu will not be displayed for this fax machine. Even if the printer menu is displayed, the settings cannot be changed.

Note:

If any changes are implemented using a web browser, then the

 

user is requested to enter their username and password . The

 

default username is ROOT and the default pass word is the last

 

six digits of the MAC address for the network card. These set-

 

tings can be modified using Admin Manager.

Admin manager

Using Admin Manager, the network card can be configured through Windows95/98/NT4.0 via the network. The settings available through Admin Manager are mostly the same as those accessible through the web. Also refer to the network card manual, which contains detailed informa-

Internet Fax

11

Page 14 Page 16
Image 15
Page 14 Page 16
Contents User’s Guide Energy Star Table of contents Internet Fax and Network Print/Network Scanner Supported systems IntroductionSupported protocols General Internet fax settingsIf power is turned on on while pressing this button down, Network card will initialise its settingsOperation overview SettingsTYPE2 User functionsInternet Fax and Network Print/Network Scanner Key LCD as -1. Both upper and lower case letters can beInternet Fax and Network Print/Network Scanner 6POP User ID and 7POP Password settings in the fax Machine must match the POP3 user name already enteredServer Web access No warning message will be given if this option is selectedPlease check carefully before carrying out this operation Admin manager User is requested to enter their username and password .Tings can be modified using Admin Manager Telnet Internet fax transmission Registering addressesSending a document Press One-Touch key Sending Result = OK Start May be cut off from the print out Tiff imagesTiff viewer Before printing a Tiff file from Imaging, go to OptionsAutomatic reception cyclic Manual reception Internet fax receptionConnecting Receiving text Receiving Tiff fileGateway services Fax to e-mailMachine is capable of relay broadcasting Internet Fax and Network Print/Network Scanner Mail to fax Internet Fax and Network Print/Network Scanner 600 dpi through the user function 89EX.FINE Mode TroubleshootingService codes Resolution of the scanned image can be set betweenReport will be left blank For service codes E001 and E002, the number of pagesFor service codes F001 and F002, the number of pages Transmission troubleshootingReception troubleshooting Mail to fax troubleshooting Internet Fax and Network Print/Network Scanner Procedure for supported operating systems Printing documentsNetWare Windows NT4.0/2000 Windows 95/98Windows Other operating systems ConfigurationConfiguring from network utilities Please set EtherTalk Disable to prevent it from being usedBanner output When a print job was cancelled on a PC, LAN Data Error Option board errorLAN data error Network problemInternet Fax and Network Print/Network Scanner General conditions Appendix a Operating InstructionsTiff S Setting item Operation Accessing different settingsInternet Fax and Network Print/Network Scanner DNS server Appendix B Mail Server SettingsMail server
Top Page Image Contents