Oki ii manual Transmission troubleshooting, For service codes F001 and F002, the number of pages

Page 31

F040: POP protocol DELE command error

F050: POP protocol TOP command error

F900: Network card I/F error

F910: TCP/IP or SMTP/POP not supported or allowed by network card

F920: Network card not ready; transmission request received while network card is initialising (redial)

F931: E-mail cannot be received (invalid TIFF)

F932: E-mail cannot be received (other than invalid TIFF)

F940: Memory full

F941: No new mail found in manual reception

F942: Command time-out

F950: Server communication error

F980: Aborted

Note:	For service codes F001 and F002, the number of pages in the
	report will be left blank.

Transmission troubleshooting

Transmission fails; a communication error occurs.

•Are the IP ADDRESS, SubNetMask and Default Gateway settings correct?

•Has the SMTP server been configured correctly?

•Has the host name been registered?

•If using DNS, is the DNS server address correct?

•Check to make sure that the server is not down.

•If DNS is ON, some servers may cause an error.

When one-touch key is pressed with an email address assigned, a warning message appears on the LCD.

•Has an e-mail address been entered that has been assigned on this machine?

LCD shows message "OPTION BOARD ERROR".

•A network card I/F error has occurred - turn the power off and on again to recover.

Internet Fax

27

Image 31

Contents User’s Guide Energy Star Table of contents Internet Fax and Network Print/Network Scanner Supported systems IntroductionSupported protocols General Internet fax settingsIf power is turned on on while pressing this button down, Network card will initialise its settingsOperation overview SettingsTYPE2 User functionsInternet Fax and Network Print/Network Scanner Key LCD as -1. Both upper and lower case letters can beInternet Fax and Network Print/Network Scanner Machine must match the POP3 user name already entered 6POP User ID and 7POP Password settings in the faxServer No warning message will be given if this option is selected Web accessPlease check carefully before carrying out this operation User is requested to enter their username and password . Admin managerTings can be modified using Admin Manager Telnet Registering addresses Internet fax transmissionSending a document Press One-Touch key Sending Result = OK Start May be cut off from the print out Tiff imagesTiff viewer Before printing a Tiff file from Imaging, go to OptionsAutomatic reception cyclic Manual reception Internet fax receptionConnecting Receiving text Receiving Tiff fileFax to e-mail Gateway servicesMachine is capable of relay broadcasting Internet Fax and Network Print/Network Scanner Mail to fax Internet Fax and Network Print/Network Scanner 600 dpi through the user function 89EX.FINE Mode TroubleshootingService codes Resolution of the scanned image can be set betweenReport will be left blank For service codes E001 and E002, the number of pagesFor service codes F001 and F002, the number of pages Transmission troubleshootingReception troubleshooting Mail to fax troubleshooting Internet Fax and Network Print/Network Scanner Printing documents Procedure for supported operating systemsNetWare Windows 95/98 Windows NT4.0/2000Windows Other operating systems ConfigurationConfiguring from network utilities Please set EtherTalk Disable to prevent it from being usedBanner output When a print job was cancelled on a PC, LAN Data Error Option board errorLAN data error Network problemInternet Fax and Network Print/Network Scanner General conditions Appendix a Operating InstructionsTiff S Setting item Operation Accessing different settingsInternet Fax and Network Print/Network Scanner DNS server Appendix B Mail Server SettingsMail server