Black Box COMPACT T1 quick start Initial Setup, Set Up Security, Command

Quick Start

Configuration

Initial Setup

Use the following commands for your initial setup, for further information see the

specific command listed in this chapter.

Command

set local off

set date {mm/dd/yyyy}

set time {hh:mm:ss}

set id {"id-name"}

set clock1 {slot:port} internal

set clock2 {slot:port} internal

set ethernet ip address {ip-addr} {mask}

set ip gateway {ip-addr}

Description

Disables DIP switches.

Set the date used for event logging. Set the time used for event logging. Set a system ID name.

Set the primary clock source.

Set the secondary clock source.

Set the ethernet IP address, in the conventional IP address format.

Set the IP gateway, in the conventional IP address format.

Set Up Security

Use the following commands to set up the security on the Compact T1. See the set user command for details.

Command

set user {"username"} level {1-3}

set user {"username"} password

Description

Specify the user name and the security level.

Set a password for the user.

22 Compact T1 - Release 6.1