Black Box COMPACT T1 quick start Chassis Ground Connector, Ground Terminals

Page 16

Quick Start

Interface Connectors

Chassis Ground Connector

Ground Terminals

1.Route wire (#6 or #8 AWG copper) from building ground to lug on Unit.

2.Strip insulation off wire end, if necessary.

Compression

Screw

Lug Barrel

Ground Lug

3.Loosen compression screw until opening is large enough to accept ground wire.

4.Insert ground wire into lug barrel, beneath compression plate and tighten compression screw.

5.Attach ground lug to chassis

12	Compact T1 - Release 6.1

Image 16

Contents Compact T1 Supporting Software Version Safety Information PrefaceElectrostatic Discharge ESD Precautions Quick Start Installation Environment Unpacking and InspectionAssembly of Compact T1 Wall Mounting Rack Mounting Optional Feature To rack mount the Unit, follow the instructions belowHeat Baffle Left Side View Thumbscrew Quick Start Compliant Installation Power CablesFerrite Beads Service Card Cables that Require Additional Ferrite BeadsFerrite Beads shipped with Adit chassis Chassis Connectors and Buttons Interface ConnectorsChassis Ground Connector Ground TerminalsPower Reset Power ConnectionsAC Power 48V BatteryTo connect -48 VDC power External Alarm Connector Pin # Description ExplanationPair Telco Connectors Pair Pin Location Function Color CodeQuick Start RS-232 Craft Port Female DB-9 Direction DescriptionT1 Connection Ports 10Base-T EthernetT1 RJ-48C Ethernet RJ-45Command Line Interface CLI Setting up a CLI connectionSet the port settings to 9600 baud 8/N/1/No Flow Control Local and Remote Management OptionConfiguration Set Up Security Initial SetupCommand Set Up a DS1/T1 Set Up a DS0/ChannelSet Up an Analog Port Set Up the Router IP or CMG Cards Set Up a Isdn BRI Service Establish a Static Channel ConnectionSet Up the OCU-DP Card Set Up a V.35 Port Change the IP Address of the DS0 Management ChannelUpgrade the Router IP or CMG Software Upgrade the Controller SoftwareInstall Country Specific Ringer Tones Dip Switches Switch Function DescriptionController Cards T1 Controller CardLEDs State DescriptionPower Supplies 115 VAC/-48 VDC Power SupplyDIP Switch Settings Service CardsFXO Card FXS Card FXS Intl cardIsdn BRI Card OCU-DP CardQuad T1 Card 35/V.54 CardCMG Router Card CRDIP Router Card COL