Quick Start
Assembly of Compact T1
Assembly of Compact T1
The cards should be positioned in the chassis as follows:
Note: Slots are labeled on the top and the bottom of the chassis.
λPower Supply in the POWER Slot
λT1 Controller in Slot A
λService Cards can be in any slot 1 through 6.
Note: When an Unit is mounted to the wall, cards that use the front cable connections should be loaded from Slot 6 to 1. This will minimize card access issues due to cable interference.
λAlways install blank faceplates in any unused slots.
A
1 | 2 | 3 | 4 | 5 | 6 |
|
|
|
|
|
|
POWER
Service Card Slots
Compact T1 - Release 6.1 | 3 |