Black Box COMPACT T1 quick start Establish a Static Channel Connection, Set Up a Isdn BRI Service

Quick Start

Configuration

Establish a Static Channel Connection

Use the following commands to establish a static channel connection.

Command

set {slot:port:channel} type {voicedata}

set {slot:port:channel} signal {lsgsemwemdwemicpddpt}

connect {slot:port} {slot:port}

Description

Set the channel type for the channel you want to map. See set (ds0) command for details.

Set the channel signaling option. See set (ds0) command for details.

Connect the channels. See the connect (card- trunk) (card-trunk)command for details.

Set Up a ISDN BRI Service

Use the following commands to set up a ISDN BRI Service. See the set (bri) command for details.

Command

set {slot:port} up

set {slot} mode {lt3ds0lt4to1tdmnt3ds0}

set {slot:port} crv {1-768}

set {slot:port} threshold {dayhour} {esses}

set {slot} pmsync {aditswitch}

set {slot:port} autoactivate {onoff}

Description

Put the ISDN line In-Service.

Set the ISDN mode.

Set the Call Reference Value. Note: value must be the same as the Access Navigator.

Set the threshold for the IDSN lines.

Set the source for performance monitoring synchronization.

Only used in 4 to 1 mode. Establishes the D channel when the FDL link can not be used.

26 Compact T1 - Release 6.1