Xerox 604S14200 Unix / Linux Solaris/SunOS HP-UX AIX, Press Dynamic Addressing

Page 19

UNIX / Linux (Solaris/SunOS) (HP-UX) (AIX)

Before You Start

Verify the Ethernet connection is complete and the desired speed is set. Then return to this page.

NOTE: By default, DHCP is enabled on the printer. This card will show you how to disable DHCP and manually set your TCP/IP information.

You can use BOOTP or RARP servers to assign TCP/IP information to your printer. Refer to the RARP or BOOTP Quick Install Cards for details.

Record the following information on this card for use during the procedure:

Host Name ____________________________

IP Address ____________________________

Subnet Mask ___________________________

Default Gateway ________________________

Your printer supports printing from a variety of UNIX platforms. Linux users should complete steps 1 through 7 and then skip to step 2 of the Go to a workstation and... section to complete installation.

Go to the printer and...

1.Connect your printer to the network with the appro- priate cabling.

2.Enter the Tools pathway.

a)Press the Access ( or ) button.

b)On the keypad enter 1111 or the current password. Press the Enter button when finished. The Touch Screen will be used for the remainder of the data entry, unless instructed otherwise.

3.Enter the Network Setup menus.

a)Press the Connectivity and Network Setup button.

b)Wait for the screen to refresh and press the Network Setup button.

c)Press the TCP/IP Options button.

4.Enable the network interface and protocol.

a)Press the TCP/IP Settings button.

b)Press Dynamic Addressing.

c)Press Disabled then press Save.

d)Press the Protocol and Media button.

e)Press the Enable button.

f)Press Save.

NOTE: The Broadcast Address will be calculated automatically.

5.Set the Host Name.

a)Press the Name/Address button.

b)One at a time press the soft buttons on the Touch Screen for each octet of the IP address and enter the numbers from the keypad.

c)Press the Host Name button.

d)When the soft keypad appears, type the host name EXACTLY as you want it to appear with correct case. When finished press the Save button twice to record the changes and exit to the TCP/IP Settings Screen.

6.Set the Subnet Mask and Gateway

a)Press the Subnet and Gateway button.

b)Press the soft buttons on the Touch Screen one at a time for each octet of the Subnet Mask and enter the numbers using the keypad.

c)Repeat this process for the IP Gateway address. When finished press Save to record the changes and exit to the TCP/IP Settings screen.

d)Press the Close button.

e)Press the TCP/IP - Line Printer button. At the next screen press the Enable button.

NOTE: While you can change the port number at which your printer will accept lpr print jobs it is recommended that you do this ONLY with extreme caution as most lpr spoolers are set to send print jobs to the default port.

f)If you wish to change the lpr port for your printer press the port number soft button and enter the desired port number at the keypad. Press Save.

19

604P15100

Page 18 Page 20
Image 19
Page 18 Page 20
Contents WorkCentre Pro 65/75/90 Page Distribute Materials Connect the Printer to a Network Enable Scanning and E-mail Options Enable the Fax Option Enable the Network Accounting Option Enable Universal Serial Bus Printing Enable Image Overwrite Security 604P14400 Go to the printer Press the Connectivity and Network Setup button100BaseT Ethernet Before You Connect to a 100BaseT Ethernet Network604P14700 Press the Dynamic Addressing button Static Manual TCP/IP AddressingBefore You Start Press the Protocol and Media buttonPrint a Configuration Report Setup DNS if required Go to the printerGo to a workstation Go to the dynamic server Dynamic TCP/IP Address Assignment DHCP/BOOTP/RARPTo change the host name Where to go from here To enable LP and LPR printingTo enter a Subnet Mask and Gateway Address Typeful Name Example Novell NetWare 4.X and 5.X NDSWorkstation Press Dynamic Addressing Unix / Linux Solaris/SunOS HP-UX AIX604P15100 Microsoft Windows 2000 LPR and IPP Printing To create a LPR Printer Go to the Server/WorkstationCreate an IPP printer Microsoft Windows NT 4.0 Server TCP/IP Repeat this Go to the workstation Go to the serverPress the Workgroup and Host button Microsoft Windows NetBEUI Peer-to-Peer NetworksPress the Printer Description button Windows 95, Windows 98 and Windows NT 4.X Workstation Users Go to the workstationsPress the Microsoft Networks button Wins Windows Internet Name ServiceGo to the NT workstation XRX08003E313E0A604P15500 Apple Macintosh AppleTalk Prepare for print driver installationGo to the workstation Press the RAW TCP/IP printing button Port 9100 TCP/IP Printing604P15700 At the printer for Http Enable Scan to E-mailMail Authentication MailLdap Directory Setup Internal Address Book Optional Configuring E-mailLdap Mappings Optional Select Map Existing Address Book Select Authentication TypePublic Address Book Optional Select Public Address Book604P16000 Press On Demand Overwrite Image Overwrite SecurityImmediate Image Overwrite On Demand Overwrite from the printerOn Demand Overwrite from a Workstation Mail Overview Mail at a GlanceXerox How E-mail works with the Xerox printerMail Terms, Definitions 604P15900

604S14200 specifications

The Xerox 604S14200 is a sophisticated multi-functional printer renowned for its adaptability and advanced features designed for business environments. This model stands out for its ability to combine printing, copying, and scanning capabilities in one compact device, making it an ideal solution for small to medium-sized enterprises.

One of the main features of the Xerox 604S14200 is its impressive print speed, which can reach up to 40 pages per minute. This allows businesses to meet tight deadlines and handle high-volume print tasks efficiently. The printer supports a variety of media sizes, including letter, legal, and custom sizes, providing versatility for different printing needs.

Another key characteristic of the Xerox 604S14200 is its printing resolution. With a resolution of up to 1200 x 1200 dpi, it delivers sharp text and vivid images, ensuring that all output is of professional quality. This makes it suitable not only for documents but also for marketing materials and presentations.

The Xerox 604S14200 integrates advanced technology that enhances its functionality. It features Automatic Document Feeding (ADF), which simplifies the process of copying and scanning multiple-page documents. This feature significantly increases productivity by allowing users to load several pages at once.

In addition to its hardware capabilities, the Xerox 604S14200 comes with intuitive software that supports seamless mobile printing and cloud connectivity. Users can easily print from their smartphones or tablets, as well as directly from various cloud services, streamlining workflows and enhancing flexibility.

Security is a paramount concern in today’s digital age, and the Xerox 604S14200 addresses this with robust security features. The printer includes secure printing options, which ensure that sensitive documents are protected and can only be accessed by authorized personnel. It also has the capability to track usage and restrict access to certain functionalities, enhancing overall data protection.

User-friendliness is another essential characteristic of the Xerox 604S14200, featuring a straightforward control panel and customizable settings. This design focuses on improving the user experience, allowing for easy operation even for those who are not tech-savvy.

In summary, the Xerox 604S14200 is a highly efficient multi-functional printer that combines speed, quality, and advanced features. Its integration of modern technologies, user-friendly design, and robust security measures make it a dependable choice for businesses seeking to enhance their productivity and streamline their printing processes.
Top Page Image Contents