Power entry module / counter / communications port
The power entry module, with on/off switch and main fuse block, is located at the base of the right accordion side panel. Adjacent to the power entry module are the print counter and communications port, diagram below. The communications port is a DB9 female type receptacle, configurable for an RS232 or RS422 link.
4
35
2
6
1
1Power Entry Module
2Line Cord Receptacle, for
3On / Off Rocker Switch,
I= On
0 = Off
4Fuse Drawer, 3AG type fuse
5Linear Feet Counter
6Communications Port, type
After initial
Handfeed
Pressing the Handfeed push- button switches the 2750 into
Folder ON
Receiver Advance Advances conveyor belts on High Capacity Print Receiver, if installed
Indicates a fault/jam condition, or open cover
Models 2753, 2755 and 2757
have similar control panels, with plain language in place of icons, e.g., MORE in place of +>
Operator’s control panel
2750 op#1 R3.doc | Page |