Xerox 560, 550 manual Forwarding a job to another CX print server, Click Retrieve

42 Chapter 6—Managing jobs

to the job (for example, PDL) are also retrieved and the cabinet file is not deleted.

You can retrieve more than one job at a time.

1.From the File menu, select Retrieve from archive.

2.Locate the archived job under its archive name, and select the related cabinet file.

3.Click Add.

The selected job appears in the lower list.

4.Click Retrieve.

The selected job appears at the top of the list in the Storage area.

5.In the Job History window, verify that the file has been successfully retrieved.

See also:

Retrieving VDP elements on page 90

Forwarding a job to another CX print server

Requirements:

●The job that you want to forward must be in the Storage area.

●The same software version must be running on both CX print servers.

1.In the Storage area, right-click the job, and select Forward to > Other.

2.In the Host name / IP Address box, type the name or IP address of the server that you want to forward the job to.

3.Click Find.

4.Select one of the following:

● Send to Storage—to send the job to the selected server’s Storage area.

● Send to print—to send the job to the selected server’s Print Queue.

5.Click Send.

Notes:

●You cannot forward an RTP file that was created from a VDP job— for example, a VPS file. You can only forward the original VDP job.

●You cannot forward a job if the operator password was changed on the destination CX print server. From the source CX print server, select Start > Run and connect to the destination CX print server. Log on using the new operator password.