Star Micronics TSP600 user manual Head from condensation, etc

Page 19

Important!

1.Do not touch the cutter blade.

·There is a cutter inside the paper outlet slot. Not only should you not put your hand in the paper outlet slot while printing is in progress, never put your hand into the outlet even when printing is not in progress.

·The printer cover can be opened when replacing the paper. How- ever, since the cutter blade is on the inside of the printer cover, be careful not to place your face or hands too close to the cutter blade.

2.Do not pull the cover open lever and open the printer cover when printing is in progress or when the auto cutter is operating.

3.Do not operate the cover open lever while pressing on the printer cover with your hand.

4.Do not pull out paper while the printer cover is closed.

5.The heating element and the driver IC of the thermal head are easily damaged. Do not touch them with metal objects, sandpaper, etc.

6.During and immediately after printing, the area around the thermal head is very hot. Do not touch it, as you could be burned.

7.Printing quality may suffer if the thermal head heating element becomes soiled by being touched with your hands. Do not touch the thermal head heating element.

8.There is a risk of damage to the driver IC of the thermal head from static electricity. Never directly touch the IC.

9.The printing quality and working life of the thermal head cannot be guaranteed if any paper other than that recommended is used. In particular, paper containing [Na+, K+, C1-] may drastically reduce

the working life of the thermal head. Please exercise caution. 10.Do not operate the printer if there is moisture on the front surface of

the head from condensation, etc.

ENGLISH

– 16 –

Image 19

Contents TSP600 Series EC Council Directive 89/336/EEC of 3 May Table of Contents Auto Cutter Model Parts Identification and NomenclatureTear Bar Model Choosing a place for the printer Paper thickness Core outer Core inner Mm when the optionalConsumable Parts and AC Adapter Mm or Paper roller holder is used Core outer/inner diameterDC24 ±5%, 2.0 a 5.0 a Load 10 sec. Max Connecting Cables and AC Adapter Connecting the Interface Cable Connecting to a Peripheral Unit Connecting the Optional AC Adapter Turning Power On Control Panel ErrorsAutomatically recoverable error Non recoverable errorPaper cut error Self Printing Loading the Roll Paper Tear off the paper as shown Tear Bar ModelAuto Cutter Model Head from condensation, etc Adjusting the Near-end Sensor Paper thick Adjustment value according to the paper you are usingPreventing Paper Jams Preventing and Clearing Paper JamsRemoving Paper Jam Releasing a Locked Cutter Auto Cutter Mode only Moving blade Cleaning the Thermal Head Periodical CleaningCleaning the Paper Holder Page Table DES Matieres Modèle avec coupe-papier automatique Identification des pièces et nomenclatureModèle avec barre de tension Emplacement de l’imprimante Ne pas plier l’extrémité arrière du papier De papier ou son noyauPapier conseillé Mitsubishi paper mills limited CC24±5%, 2,0 a charge de 10 sec à 5,0 a max Passez l’attache dans le tore de fer- rite Câbles de connexion et adaptateur secteurConnexion du câble d’interface Raccordement d’un appareil périphérique Attension Connexion de l’adaptateur secteur optionnelMise sous tension de l’imprimante Erreur non récupérable Panneau de commandeErreurs Erreur récupérable automatiquementErreur de découpe du papier Auto-impression Chargement du rouleau de papier Modèle avec coupe-papier auto- matique Ne pas toucher la lame du coupe-ruban Réglage du capteur de fin de rouleau Papier restante, lorsqu’une épais Les dimensions C et la longueur deValeur de réglage correspondant au papier utilisé Entraînera une disproportion entreCorrection de bourrages de papier Prévention des bourrages de papierUnité de découpage automatique Couvercle avant Lame mobile Nettoyage de la tête d’impression NettoyageNettoyage du support de papier Page Inhaltsverzeichnis Beschreibung und Bezeichnung der Geräteteile Abreißkantenmodell Wahl eines Aufstellungsorts für den Drucker Papierdicke Kern außen Verbrauchsteile und NetzteilWichtig Anschlußkabel und Netzteil Außerdem sollte der Netzstecker abgezogen sein Anschließen des SchnittstellenkabelsAnschluß an ein Peripheriegerät Anschließen des optionalen Netzteils Einschalten Nicht behebbare Fehler BedienfeldFehler Automatisch behebbare FehlerPapierschnitt-Fehler Testdruck SelbstdruckEinlegen der Papierrolle Das Papier abreißen, wie in der Ab- bildung gezeigt Pierrolle mit einer Breite von 57,5 mmRille im Drucker setzen AbreißkantenmodellNicht die Schneidwerkklinge berühren Einstellung des Endanäherungs-Sensors Das Standardmodell ist werkseitig auf Niveau 1 gestellt Einstellwerte entsprechend des verwendeten PapiersVerhindern von Papierstau Verhindern und Beheben von PapierstauBeheben von Papierstau Achtung Bewegliche Klinge Reinigen des Thermalkopfes Regelmäßige ReinigungReinigen des Papierhalters Page Indice Modello con taglierina automatica Identificazione delle parti e nomenclaturaModello con barra di strappo Scelta di un luogo per la stampante Spessore carta Nucleo esterno Parti soggette a consumo e trasformatore CAImportante Cavi di collegamento e trasformatore CA Collegamento del cavo interfaccia Collegamento ad un’unità periferica Collegamento del trasformatore CA opzionale Accensione Nota ErroriPannello di controllo e altre funzioni Pannello di controlloErrore di taglio carta Stampa automatica Inserimento del rotolo di carta Modello con barra di strappo Importante Regolazione del sensore di esaurimento prossimo Livello 1 prima di uscire dalla La dimensione C e la lunghezza diValore di regolazione secondo la carta usata Il modello standard è impostato sulEliminazione degli inceppamenti della carta Prevenzione degli inceppamenti della cartaCautela Lama mobile Pulizia della testina termica Pulizia periodicaPulizia del comparto carta General Specifications Appendix a SpecificationsInterface Auto Cutter SpecificationsElectrical Characteristics Viewed from Connector SurfaceCutter life Environmental RequirementsReliability 12.5% with paper thickness in the 65 µ mAppendix B Dip Switch Setting Parallel Interface Type ESC/POS modeFactory settings of DIP switch 2 are all on Serial Interface Type 102 103 Parallel interface connector printer side Table of Connection Signals for Each ModeAppendix C Parallel Interface Appendix D Serial Interface RS-232C ConnectorSub 9 Pin option Followings are a recommended interface cable connections Cable ConnectionsAppendix E Periheral Unit Drive Circuit Peripheral Drive ConnectorModular plug Appendix F Memory Switch Settings Overseas Subsidiary Companies Star Micronics AMERICA, INC