2 Procedure
VCAUTION!
●The actions described in this manual should only be performed by technical specialists.
●Repairs to the device that do not relate to CSS failures must only be carried out by service personnel. Please note that unauthorized inter- ference with the system will void the warranty and exempt the manufacturer from all liability.
●Any failure to observe the guidelines in this manual, and any improper repairs could expose the user to risks (electric shock, energy hazards, fire hazards) or damage the equipment.
ÊFirst of all, carefully read the safety instructions in the chapter “Safety instructions” on page 13 et seq..
ÊMake sure that all necessary manuals (see the section “Documentation overview” on page 5) are available; print the PDF files if required. Most importantly, you will need the operating manual for the server and the technical manual for the system board.
ÊShut the server down correctly, switch it off, disconnect the power plugs and open the server as described in the chapter “Preparation” on page 19 et seq..
ÊCarry out the expansion or upgrade of your server as described in the pertinent chapter.
IInstallation and removal of the
ÊClose the server, connect it to the power outlet, and switch it on as described in the chapter “Completion” on page 61 et seq..
ÊStart the operating system and make the appropriate configuration if necessary (see the operating manual).
RX200 S5 | Options Guide | 11 |