Button/LED Function
Name of the button and | Function |
|
| |
LED |
|
|
| |
|
|
|
| |
|
|
| ||
Button | Next | Displays the next LCD screen. | ||
|
|
| ||
| Previous | Displays the previous LCD screen. | ||
|
|
| ||
|
| Moves the cursor to the left. | ||
|
|
| ||
|
| Moves the cursor to the right. | ||
|
|
| ||
| Exit | When you are entering settings on the Operator panel, pressing this button | ||
|
| returns you immediately to the Scanner Ready screen. | ||
|
|
| ||
| Enter | Enters the parameter currently selected by the cursor. | ||
|
|
| ||
| Send To/ | Operational only when Manual start mode is set or the Read lamp lights; Starts | ||
| Start | the reading when video interface option is used. Some application software | ||
|
| packages make use of this button. | ||
|
|
|
|
|
| Stop | When the | Check | LED lights, pressing this button releases the error status |
|
| (turns off | Check | and returns to the Scanner Ready screen). |
|
| Operational only during the reading operation; stops the reading when the video | ||
|
| interface option is used. | ||
|
| Also turns off the | Check lamp. | |
|
|
| ||
LED |
| Indicates that the scanner is On. | ||
|
|
| ||
| Read | Indicates the scanner is reading or ready to read. | ||
|
|
| ||
| Check | If lit, this indicates that an alarm occurred. Pressing the Stop button | ||
|
| turns the | Check | lamp Off. |
|
| If it blinks at one second intervals, this means that a jam or double feed | ||
|
| has been detected. If the problem is jammed paper, removing the jammed | ||
|
| paper turns off the Check lamp. If the problem is double feed, pressing | ||
|
| the Stop button turns off the Check lamp. | ||
|
| If it blinks at four seconds intervals, this means that cleaning the ADF is | ||
|
| necessary. |
| |
|
|
|
|
|