Fujitsu fi-4750L manual Manual Feed Mode Setting

Page 37

Manual Feed Mode Setting

In this mode, the scanner waits for some predetermined time before issuing a “Paper Empty” message after all documents are read. This predetermined time (time-out limit) is specified in the Setup mode. Therefore, you can set the next documents on the ADF chute without interrupting the reading opera- tion. The procedures for setting the manual feed mode are as follows:

<Screen M1>

1Turn the power On and verify that

“Scanner Ready” is displayed on the LCD.

<Screen M2>

2Press then the scanner displays

Screen M2.

NOTICE

The “Mode Select 0” screen is skipped when your scanner is controlled through the SCSI interface.

<Screen M3>

3Press then the scanner displays Screen M3.

<Screen M4>

4Press then the scanner displays

Screen M4.

5Select “Yes” by pressing . Then press .

<Screen M1>

6Press to return to the “Scanner

Ready” screen. Note that “Manual Feed” is shown on the LCD. This means that the scanner is in Manual Feed mode.

3-3

Image 37

Contents Fi-4750L Image Scanner Fi-4750L Image Scanner Revisions, Disclaimers Page Fujitsu France S.A Fujitsu OfficesPage Preface Conventions Contents Viii Terms Index Checking the Components Units and Assemblies Operator Panel ComponentsChecking the Components Units Units and AssembliesFi-4750L Function Assemblies Arrangement Operator PanelName of the button Function Button/LED FunctionCounter Function Counter DisplayOperation status Temporary error Alarm Page Page Installation and Connections Precautions Inspection Repositioning the Shipping Lock Connecting the power cable Turning the power switch OffCable Connections Connecting the chute cable Connecting the interface cablesMounting the Stacker Setting the Scsi ID and the Scsi Terminator Page Operating Instruction Turning the Power On Waking up the Scanner from the Low Power Mode Manual Feed Mode Setting ADF Loading Documents on the ADFABD Documents Guide Guide lever Both sides Max 20 mm 0.8 or 10 mm 0.4 See Notices Loading Documents on the Flatbed Scanner parts involved when loading documentsReading a Page from a Thick Book Page ADF Document Specification Scanner Maximum Minimum Document SizeFi-4750L A3/Double Letter A8 Portrait Precautions Paper weightDocument Quality Document typeMore than 30 mm Less than Feed direction Top of the paper Country Unit Conversion ADF Document Feeder CapacityAreas that must not be perforated Areas not to be PerforatedGrounding color area Grounding Color AreasDouble Feed Detection Condition Job separation sheet Job Separation SheetScanner Specifications Specification Remarks Basic Product SpecificationSpecification Installation SpecificationDimensions Page Consumables Options Video Interface Option IPC-4D Option Consumables and OptionsConsumables Name Specification RemarksName Remarks OptionsVideo Interface Option How to Install the Video Interface Option BoardPage Parameter Description Without IPC With IPC-4D Description OptionParameter Description IPC-4D Option Page Activating the Setup Mode Contents of the Setup Mode Setup ModeActivating the Setup Mode Contents of the Setup Mode Scsi ID Setting double feed detection Paper Thickness Setting double feed detection Paper Length Setting IPC pre-set mode Setting the pick start time Reset of the abrasion counterSetting the time-out limit Page Scsi Terminator Setting Scsi ID SettingIPC Status Display Low Power Mode Setting Select Interface Select Built-In/IPC-4D Image Processing Display the TPS Board ID NumberImage Processing M4097DAdjust ADF Erasing Edges Adjust FB Erasing Edges Page Glossary of Terms Double Letter Size IPC-4D Paper JAM TPS GL-6 Index Pick start time Declarations of Conformity DE-2