Fujitsu fi-4750L Display the TPS Board ID Number, Select Built-In/IPC-4D Image Processing, M4097D

Page 81

15. Display the TPS Board ID Number

<Screen 55> (An Example)

1Press “Next” or “Previous” and let the

scanner display Screen 55.

The scanner displays the ID number if the applicable board is installed.

NOTICE

If the Fujitsu video Interface Option board is installed properly, the display shows “ID=7”.

2Press to return.

16. Select Built-In/IPC-4D Image Processing

<Screen 56>

1Press ”Next” or and let the scanner

display the Screen 56.

2At Screen 56, press or to select ”Standard” or ”IPC-40”.

When ”Standard” is selected, the scanner uses its built-in image processing. On the other hand, the scanner selects the image processing of the IPC-4D when the ”IPC-4D” is installed and selected.

NOTICE

The factory default is ”Standard”.

NOTICE

fi-4750L has built-in Image Processing. The following image processing is supported both by the fi-4750L and the IPC-4D. As a default, the scanner built-in functions are enabled. By setting "On" using the Operator Panel, the IPC-4D image processing overrides the built-in functions.

 

Image Processing

IPC-4D

M4097D

 

 

 

 

1

Emphasis/Smoothing

5 x 5 matrix

3 x 3 matrix

2

Outline

Pre-threshold Laplacian

Laplacian

 

 

 

 

3

Simplified Dynamic Threshold

IPC-2 like SDTC

3 x 3 max-min

 

 

 

 

The IPC-4D support of those functions is intended for compatibility with the IPC-3/3D. The matrix size used in the IPC-4D is larger than the one in the fi-4750L. The fi-4750L Built-in Dynamic Threshold is a new algorithm.

7-13

Image 81
Contents Fi-4750L Image Scanner Fi-4750L Image Scanner Revisions, Disclaimers Page Fujitsu France S.A Fujitsu OfficesPage Preface Conventions Contents Viii Terms Index Checking the Components Units and Assemblies Operator Panel ComponentsChecking the Components Units and Assemblies UnitsFi-4750L Function Assemblies Arrangement Operator PanelName of the button Function Button/LED FunctionCounter Function Counter DisplayOperation status Temporary error Alarm Page Page Installation and Connections Precautions Inspection Repositioning the Shipping Lock Turning the power switch Off Connecting the power cableCable Connections Connecting the chute cable Connecting the interface cablesMounting the Stacker Setting the Scsi ID and the Scsi Terminator Page Operating Instruction Turning the Power On Waking up the Scanner from the Low Power Mode Manual Feed Mode Setting ADF Loading Documents on the ADFABD Documents Guide Guide lever Both sides Max 20 mm 0.8 or 10 mm 0.4 See Notices Loading Documents on the Flatbed Scanner parts involved when loading documentsReading a Page from a Thick Book Page ADF Document Specification Document Size Scanner Maximum MinimumFi-4750L A3/Double Letter A8 Portrait Precautions Paper weightDocument Quality Document typeMore than 30 mm Less than Feed direction Top of the paper Country Unit Conversion ADF Document Feeder CapacityAreas that must not be perforated Areas not to be PerforatedGrounding color area Grounding Color AreasDouble Feed Detection Condition Job separation sheet Job Separation SheetScanner Specifications Specification Remarks Basic Product SpecificationSpecification Installation SpecificationDimensions Page Consumables Options Video Interface Option IPC-4D Option Consumables and OptionsConsumables Name Specification RemarksName Remarks OptionsVideo Interface Option How to Install the Video Interface Option BoardPage Parameter Description Without IPC With IPC-4D Description OptionParameter Description IPC-4D Option Page Activating the Setup Mode Contents of the Setup Mode Setup ModeActivating the Setup Mode Contents of the Setup Mode Scsi ID Setting double feed detection Paper Thickness Setting double feed detection Paper Length Setting IPC pre-set mode Setting the pick start time Reset of the abrasion counterSetting the time-out limit Page Scsi ID Setting Scsi Terminator SettingIPC Status Display Low Power Mode Setting Select Interface Select Built-In/IPC-4D Image Processing Display the TPS Board ID NumberImage Processing M4097DAdjust ADF Erasing Edges Adjust FB Erasing Edges Page Glossary of Terms Double Letter Size IPC-4D Paper JAM TPS GL-6 Index Pick start time Declarations of Conformity DE-2