Fujitsu fi-4750L manual Setting IPC pre-set mode

3. Setting IPC pre-set mode

When you set the use of the IPC pre-set mode, you must set it as follows:

1Press “Next” or “Previous” and let the scanner display Screen 43.

<Screen 43>

2At Screen 43, press or to select the

pre-Setting and press to activate the pre-setting. Then the scanner displays Screen 43-1.

NOTICES

The following 2PC pre-settings can be selected when 2PC-4D is installed:

Preset 1: Captures texts printed on the colored background

Preset 2: Produces an image with good contrast

Preset 3: OCR Smoothing

Preset 4: Image Smoothing

Preset 5: Dither

The following built-in IPC pre-settings can be selected even though IPC-4D is not installed:

•Sharpen

•Darken Character

•Copy Quality

<Screen 43-1>

3At Screen 43-1, select “Yes” or “No”. Note

that when you select “Yes”, the IPC setting from the Host computer is ignored. If you select “No”, the IPC setting will be changed according to the host setting. Finally press .

NOTICE

When you select the Copy Quality, select the scanner and printer settings carefully to get the best quality.

7-6