Fujitsu fi-4750L manual Activating the Setup Mode

Page 69

Activating the Setup Mode

This section describes how to activate the setup mode.

<Screen M1>

1Turn the power On. Then the scanner displays “Scanner Ready” on the LCD.

<Screen M2>

2If the scanner does not have a video interface

option, go to the procedure step 3. Press then the scanner with the video interface option displays Screen M2.

<Screen M3>

3Press then the scanner displays

Screen M3.

<Screen M4>

4Press then the scanner displays

Screen M4.

5Press . Now the scanner is at Screen 41 (page 6-3) in Setup mode.

NOTICE

Any time you press , you can return to the “Scanner Ready” screen.

7-1

Image 69

Contents Fi-4750L Image Scanner Fi-4750L Image Scanner Revisions, Disclaimers Page Fujitsu France S.A Fujitsu OfficesPage Preface Conventions Contents Viii Terms Index Checking the Components Units and Assemblies Operator Panel ComponentsChecking the Components Units and Assemblies UnitsFi-4750L Function Assemblies Arrangement Operator PanelName of the button Function Button/LED FunctionCounter Function Counter DisplayOperation status Temporary error Alarm Page Page Installation and Connections Precautions Inspection Repositioning the Shipping Lock Turning the power switch Off Connecting the power cableCable Connections Connecting the chute cable Connecting the interface cablesMounting the Stacker Setting the Scsi ID and the Scsi Terminator Page Operating Instruction Turning the Power On Waking up the Scanner from the Low Power Mode Manual Feed Mode Setting ADF Loading Documents on the ADFABD Documents Guide Guide lever Both sides Max 20 mm 0.8 or 10 mm 0.4 See Notices Loading Documents on the Flatbed Scanner parts involved when loading documentsReading a Page from a Thick Book Page ADF Document Specification Document Size Scanner Maximum MinimumFi-4750L A3/Double Letter A8 Portrait Precautions Paper weightDocument Quality Document typeMore than 30 mm Less than Feed direction Top of the paper Country Unit Conversion ADF Document Feeder CapacityAreas that must not be perforated Areas not to be PerforatedGrounding color area Grounding Color AreasDouble Feed Detection Condition Job separation sheet Job Separation SheetScanner Specifications Specification Remarks Basic Product SpecificationSpecification Installation SpecificationDimensions Page Consumables Options Video Interface Option IPC-4D Option Consumables and OptionsConsumables Name Specification RemarksName Remarks OptionsVideo Interface Option How to Install the Video Interface Option BoardPage Parameter Description Without IPC With IPC-4D Description OptionParameter Description IPC-4D Option Page Activating the Setup Mode Contents of the Setup Mode Setup ModeActivating the Setup Mode Contents of the Setup Mode Scsi ID Setting double feed detection Paper Thickness Setting double feed detection Paper Length Setting IPC pre-set mode Setting the pick start time Reset of the abrasion counterSetting the time-out limit Page Scsi ID Setting Scsi Terminator SettingIPC Status Display Low Power Mode Setting Select Interface Select Built-In/IPC-4D Image Processing Display the TPS Board ID NumberImage Processing M4097DAdjust ADF Erasing Edges Adjust FB Erasing Edges Page Glossary of Terms Double Letter Size IPC-4D Paper JAM TPS GL-6 Index Pick start time Declarations of Conformity DE-2