17. Adjust ADF Erasing Edges
<Screen 57>
1Press “Next” 
or “Previous” 
and let
the scanner display Screen 57.
2 At Screen 57, press 
or 
to select
“Yes” and press 
. Then the scanner displays Screen
<Screen
3At Screen
settings to the factory default or select “No” to make new settings (as shown
below). Then press 
. The scanner displays Screen
<Screen
4At Screen 
or 
to change
the top setting. The value changes in 1
mm units. Then press 
to activate the setting. The scanner displays Screen
<Screen
5At Screen 
or 
to change
the bottom setting. With (+:Up), the area is set upward from the bottom edge of the image. With
Then press 
to activate the setting. The scanner displays Screen
<Screen
6At Screen 
or 
to change
the left setting. The value changes in 1
mm units. Then press 
to activate the setting. The scanner displays Screen
<Screen
7At Screen 
or 
to change
the top setting. The value changes in 1
mm units. Then press 
to activate the setting. The scanner displays the next setup item.
