
18. Adjust FB Erasing Edges
<Screen 58>
1Press “Next” or “Previous”
and let the
scanner display Screen 58.
2 At Screen 58, press or
to select “Yes”
and press . Then the scanner displays Screen
<Screen
3At Screen
settings to the factory default or select “No” to make new settings (as shown below). Then
press . The scanner displays Screen
<Screen
4At Screen or
to change the
top setting. The value changes in 1 mm
units. Then press to activate the setting. The scanner displays Screen
<Screen
5At Screen or
to change the
bottom setting. With (+:Up), the area is set upward from the bottom edge of the image. With to activate the setting. The scanner displays Screen
<Screen
6At Screen or
to change the
left setting. The value changes in 1 mm
units. Then press to activate the setting. The scanner displays Screen
<Screen
7At Screen or
to change the
top setting. The value changes in 1 mm
units. Then press to activate the setting. The scanner displays the next setup item.