Fujitsu fi-4750L manual Temporary error

Page 21

Temporary error

<Hopper empty>

This message is displayed if there is no more paper on the ADF paper chute during a read operation in ADF mode. Fill the ADF paper chute with paper. To enable the read operation, press the stop button.

<Jam>

This message is displayed if a document is jammed in the ADF. See the “Cleaning and Maintenance” manual. (“Cleaning paper jams” “Symptom 11” “Symptom 12”)

<ADF cover open>

This message is displayed if the ADF is not closed completely.

Close the ADF completely, and enable the read operation.

<Double feed error>

This message is displayed when the ADF detects the Double feed error. Check the document and re-scan the document.

1-9

Image 21

Contents Fi-4750L Image Scanner Fi-4750L Image Scanner Revisions, Disclaimers Page Fujitsu France S.A Fujitsu OfficesPage Preface Conventions Contents Viii Terms Index Checking the Components Units and Assemblies Operator Panel ComponentsChecking the Components Units and Assemblies UnitsFi-4750L Function Assemblies Arrangement Operator PanelName of the button Function Button/LED FunctionCounter Function Counter DisplayOperation status Temporary error Alarm Page Page Installation and Connections Precautions Inspection Repositioning the Shipping Lock Turning the power switch Off Connecting the power cableCable Connections Connecting the chute cable Connecting the interface cablesMounting the Stacker Setting the Scsi ID and the Scsi Terminator Page Operating Instruction Turning the Power On Waking up the Scanner from the Low Power Mode Manual Feed Mode Setting ADF Loading Documents on the ADFABD Documents Guide Guide lever Both sides Max 20 mm 0.8 or 10 mm 0.4 See Notices Loading Documents on the Flatbed Scanner parts involved when loading documentsReading a Page from a Thick Book Page ADF Document Specification Document Size Scanner Maximum MinimumFi-4750L A3/Double Letter A8 Portrait Precautions Paper weightDocument Quality Document typeMore than 30 mm Less than Feed direction Top of the paper Country Unit Conversion ADF Document Feeder CapacityAreas that must not be perforated Areas not to be PerforatedGrounding color area Grounding Color AreasDouble Feed Detection Condition Job separation sheet Job Separation SheetScanner Specifications Specification Remarks Basic Product SpecificationSpecification Installation SpecificationDimensions Page Consumables Options Video Interface Option IPC-4D Option Consumables and OptionsConsumables Name Specification RemarksName Remarks OptionsVideo Interface Option How to Install the Video Interface Option BoardPage Parameter Description Without IPC With IPC-4D Description OptionParameter Description IPC-4D Option Page Activating the Setup Mode Contents of the Setup Mode Setup ModeActivating the Setup Mode Contents of the Setup Mode Scsi ID Setting double feed detection Paper Thickness Setting double feed detection Paper Length Setting IPC pre-set mode Setting the pick start time Reset of the abrasion counterSetting the time-out limit Page Scsi ID Setting Scsi Terminator SettingIPC Status Display Low Power Mode Setting Select Interface Select Built-In/IPC-4D Image Processing Display the TPS Board ID NumberImage Processing M4097DAdjust ADF Erasing Edges Adjust FB Erasing Edges Page Glossary of Terms Double Letter Size IPC-4D Paper JAM TPS GL-6 Index Pick start time Declarations of Conformity DE-2