Start Remote Mode and Change Transfer Speed:
1. | Press and hold RMT for 2 seconds to activate the Remote | |
| mode. |
|
2. | Select the transfer speed except for | , then press E and |
| the scanner will start Remote mode. |
|
A unique feature of the UBCT8 is that all the front panel keys on the radio remain operational in Remote mode.
For information on purchasing UBCT8 Scanner software to program and control your UBCT8,
you can contact the following:
UNIDEN AUSTRALIA PTY | UNIDEN NEW ZEALAND | |
LIMITED |
| LIMITED |
SERVICE DIVISION |
| SERVICE DIVISION |
345 Princes Highway, |
| 150 Harris Road, |
Rockdale, |
| East Tamaki, |
NSW 2216, |
| Auckland, |
AUSTRALIA |
| NEW ZEALAND |
Fax: (02) 9599 3278 |
| Fax: (09) 274 4253 |
www.uniden.com.au |
| www.uniden.co.nz |
PC Control Parameter |
| |
For your information: | : 9600/19200/38400/57600 bps (adjustable) | |
Transfer speed | ||
Start/Stop bit | : 1 bit, 1 bit |
|
Data Length | : 8 bit |
|
Parity Check | : None |
|
Code | : ASCII code |
|
Flow Control | : None |
|
Return Code | : Carriage Return only | |
Clone Mode
You will need to purchase a RS232C straight cable a null modem adapter. RS232C straight cables are available as male to male or male to female. Even if the RS232C straight cable you buy already has the male to male connectors, you will still have to have the null modem adapter. On the next page you will see the pin connections that are internal to a standard device. (These items are available at your local electronics stores.)
