Service Scanning
The service scan feature allows you to rotatethrough the following six service banks.
1. Press to select a Service. '
2. Continue pressing until your desired Service is
displayed.
3. Aftera three second delay scanning begins. If you
want to startscanning immediately, press
Press at any time to hold the frequency.Press the or key
to move up or down the frequency.If you find the frequency you want to store, while
in Hold mode you can store the frequency (see page21).
• If you want to remain on a frequency until a responding transmission is received,
press to activate the delay feature (See page28).
•To skip a frequency, press . You can program up to 100 skip frequencies
from the service frequencies.
SVC
SVC
HOLD/RESUME.
Notes: • HOLD/RESUME
DELAY
L/O
(1) Police*
(2) Rail Roads*
(3) Aircraft**
(4) Marine Band
(5) UHF CB Band
(6) AM CB BAND*
' appears
on the display with the current servicebank
below.
eg: Police (POL), RailRoad (RLR),
Aircraft (AIR), Marine (MRN), UHF CB
(UCB),AM CB (ACB).
* Presetfrequencies valid for Australia Only (not validfor NZ)
** ExceptAeronautical Radio Navigation (108-117.9875 MHz)
SERVICE