Note:
Note:
HOLD/RESUME.
Todirectly access a specific ID location:
HOLD/RESUME
HOLD/RESUME.
HOLD/RESUME.
SRCH
One Scan List must always be active. If you try and deactivate all the Scan Lists,
Scan List 1 will automatically be active.
3. Torestore a Scan List to active scanning, press its number again.
. Remember! When you pressTRUNK in the Trunking mode, you can be out of the
Trunkingmode and enter into Private Scan Hold mode.
appears on the display duringTrunk Scan instead of simply .
If you want to stop on a ID during ID scanning, press
There are several ways to access a specific ID quickly.
1. Press to enter into Hold mode.
2. Using the keypad, or key,enter the ID location number
(See page31).
3. Press
If you want to resume scanning, press
Once you have programmed all the frequencies for a trunked system, Search will let you
immediately starthearing transmissions.
When in theTrunking mode, press and the scanner begins to find any active IDs.
When the scanner finds any ID, you will hear it.
Talkgroupsdisplay differently in Motorola, EDACS and LTR systems. Youshould read the
appropriate partsof this guide to understand the formats.
The display indicates the bank and the type of trunked system you are monitoring. While
monitoring on ID, press the key,and the scanner will check if any other IDs are active.
Regardless of the system, you won't know exactly who you are receiving until you listen for
a while. Of course, figuring out who each ID representsis half the fun of Trunk Tracking.
Later,when you learn more about a system, you will want to store lists of talkgroups. Then
you can scan specific agencies and users, and use the many other features your radio
provides.
ID Scan Hold FeatureID Search Mode