Set Close Call Alert
This option controls whether the scanner sounds an additional alert tone when a Close Call signal is detected.
Press 
or 
to select the option, and then press E.
Setting of pager screen
This option sets whether the scanner screens common pager frequencies from hits during Close Call searching.
1. Press 
or 
, to select the option, and then press E.
Pager Screen On : The scanner ignores hits on common pager frequencies.
Pager Screen OFF : The scanner does not screen for common pager frequencies.
Note: Pager screen affects the following frequency range. 148.0000 - 149.2500 MHz
2. To return to previous mode, press
Alert Tone Volume
Push VOL to select Loud, Medium, or Soft.
The Alert Tone beeps and the alert light flashes to confirm your choice.
Alert Light Adjustment
The Alert Light has three settings (Bright, Dimmer, Off).
Push SQL to select Bright, Dimmer or Off.
The Alert Light flashes and the alert tone beeps.
If you select Off, “FLASH” will be displayed to remind you the Alert Light is Off.
