*** Requires programming of frequencies in exact order and location.
1. Select and press . Use the keypad and ( , decimal key) to enter a frequency
for the trunked system.
For example, enter .
Toclear a mistake while entering a frequency, press
(decimal key) twice, and startover.
2. Then press .
The (EDACS), (Motorola) or (LTR) appears depending on the trunked
system selected.
If the frequency is out of the range of the system chosen in this step, you will hear an
error tone, the channel number flashes and an error message appears on the display.
3. Use the or key to select the next channel in the bank and press .
4. Repeat steps2 and 3 until all frequencies have been entered.
5. Press to begin searching the bank you‘ve
programmed.
Then select the programmed bank by using the keypad.
Tolockout the keypad to prevent re-programming of talkgroups, you can
use Memory Lock (Refer to “Memory Lock” on page22).
If you want to return to the previous menu screen, press in the
TrunkProgramming mode.
Each bank of your UBCT8 can be a trunk tracking bank and it can be a conventional
scanning bank. When you designate a bank as a trunking bank, your scanner setsup 5 Scan
Lists,which are simply lists used to store your favorite Talk Group IDs. Each list can contain
up to 10 IDs, so you can store a totalof 50 IDs for each trunk tracking bank. (250 IDs if you
use all the banks as trunking banks!)
Scan Listshelp you organize the trunking system users into categories. For example, you
might use List#1 for police IDs, List#2 for fire departmentIDs, List#3 for emergency medical
service IDs, etc. Once IDs are stored in lists,you can scan them as you scan conventional
frequencies and you can lockout any one (up to 4) of the 5 Scan Listsby pressing the
corresponding numeric key.When an ID is active, the Scan List number will appear on the
display.You can program your Scan Lists either manually or during Trunking Search mode.
STEP 2: Programming TrunkingFrequenciesProgramming TalkGroup ID/Scan ListsScan Lists
E
Note:
E
“E” “M” “L”
E
SRCH
Remember!
Hint: HOLD/RESUME